[PATCH v2 0/3] PHYTEC i.MX 6UL/ULL devicetree patches

[Shawn Guo]

On Tue, Feb 22, 2022 at 10:16:03AM +0100, Andrej Picej wrote:
> Hi all,
> 
> this patch series contains PHYTEC i.MX 6UL/ULL devicetree patches not
> yet upstreamed.
> 
> First and second patch add devicetree for relatively new phyGATE
> Tauri-S, which is based on i.MX 6ULL.
> 
> The third patch moves from using 2 pwm-cell to default 3 cell pwm
> property.
> 
> Changes in v2:
>  - dropped the patch: "ARM: dts: imx6ul: phycore: Change USB LDO voltage
>    for usb compliance" (LDO regulator shouldn't be configured as
>    always-on, it should be enabled/disabled by consumer),
>  - other changes are described in the corresponding patches.
> 
> Best regards,
> Andrej
> 
> Alexander Bauer (1):
>   ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX
>     6ULL
> 
> Andrej Picej (2):
>   dt-bindings: arm: fsl: add PHYTEC phyGATE Tauri i.MX6 ULL
>   ARM: dts: imx6ul: peb-av-02: move to 3 cell pwm

Applied all, thanks!