[PATCH v4 00/15] Move HEVC stateless controls out of staging
Adam Ford
aford173 at gmail.com
Wed Apr 6 05:55:26 PDT 2022
On Wed, Apr 6, 2022 at 7:50 AM Benjamin Gaignard
<benjamin.gaignard at collabora.com> wrote:
>
>
> Le 06/04/2022 à 14:46, Adam Ford a écrit :
> > On Wed, Apr 6, 2022 at 7:41 AM Benjamin Gaignard
> > <benjamin.gaignard at collabora.com> wrote:
> >>
> >> Le 06/04/2022 à 14:28, Adam Ford a écrit :
> >>> On Wed, Apr 6, 2022 at 1:56 AM Benjamin Gaignard
> >>> <benjamin.gaignard at collabora.com> wrote:
> >>>> Le 05/04/2022 à 23:27, Adam Ford a écrit :
> >>>>> On Mon, Apr 4, 2022 at 10:56 AM Benjamin Gaignard
> >>>>> <benjamin.gaignard at collabora.com> wrote:
> >>>>>> Le 02/04/2022 à 18:59, Adam Ford a écrit :
> >>>>>>> On Sat, Apr 2, 2022 at 11:22 AM Adam Ford <aford173 at gmail.com> wrote:
> >>>>>>>> On Fri, Apr 1, 2022 at 8:18 AM Benjamin Gaignard
> >>>>>>>> <benjamin.gaignard at collabora.com> wrote:
> >>>>>>>>> Le 31/03/2022 à 08:53, Benjamin Gaignard a écrit :
> >>>>>>>>>> Le 30/03/2022 à 20:52, Adam Ford a écrit :
> >>>>>>>>>>> On Wed, Mar 30, 2022 at 2:53 AM Benjamin Gaignard
> >>>>>>>>>>> <benjamin.gaignard at collabora.com> wrote:
> >>>>>>>>>>>> Le 28/02/2022 à 15:08, Benjamin Gaignard a écrit :
> >>>>>>>>>>>>> This series aims to make HEVC uapi stable and usable for hardware
> >>>>>>>>>>>>> decoder. HEVC uapi is used by 2 mainlined drivers (Cedrus and Hantro)
> >>>>>>>>>>>>> and 2 out of the tree drivers (rkvdec and RPI).
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> After the remarks done on version 2, I have completely reworked to
> >>>>>>>>>>>>> patches
> >>>>>>>>>>>>> split so changelogs are meaningless. I have also drop "RFC" from the
> >>>>>>>>>>>>> titles.
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Version 4:
> >>>>>>>>>>>>> - Add num_entry_point_offsets field in struct
> >>>>>>>>>>>>> v4l2_ctrl_hevc_slice_params
> >>>>>>>>>>>>> - Fix V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS name
> >>>>>>>>>>>>> - Initialize control V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
> >>>>>>>>>>>>> - Fix space/tab issue in kernel-doc
> >>>>>>>>>>>>> - Add patch to change data_bit_offset definition
> >>>>>>>>>>>>> - Fix hantro-media SPDX license
> >>>>>>>>>>>>> - put controls under stateless section in v4l2-ctrls-defs.c
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> At the end fluster tests results on IMX8MQ is 77/147 for HEVC codec.
> >>>>>>>>>>>> Dear reviewers,
> >>>>>>>>>>>>
> >>>>>>>>>>>> This series is waiting for your feedback,
> >>>>>>>>>>> I tried several times with the suggested repos for both the kernel and
> >>>>>>>>>>> g-streamer without success getting Fluster to pass any tests on the
> >>>>>>>>>>> imx8mq. I can try again but I likely won't get to it until this
> >>>>>>>>>>> weekend. If I can get it working, I'll test both the 8mq and 8mm.
> >>>>>>>>>> Thanks a lot for that.
> >>>>>>>>>>
> >>>>>>>>>> Benjamin
> >>>>>>>>> Adam,
> >>>>>>>>>
> >>>>>>>>> You may need to check if h265parse and v4l2slh265dec are available on your board.
> >>>>>>>> I ran gst-inspect to see what showed up with 265 in the name.
> >>>>>>>>
> >>>>>>>> # gst-inspect-1.0 |grep 265
> >>>>>>>> libav: avdec_h265: libav HEVC (High Efficiency Video Coding) decoder
> >>>>>>>> rtp: rtph265depay: RTP H265 depayloader
> >>>>>>>> rtp: rtph265pay: RTP H265 payloader
> >>>>>>>> typefindfunctions: video/x-h265: h265, x265, 265
> >>>>>>>> v4l2codecs: v4l2slh265dec: V4L2 Stateless H.265 Video Decoder
> >>>>>>>> videoparsersbad: h265parse: H.265 parser
> >>>>>>>>
> >>>>>>>> It appears I have both h265parse and v4l2slh265dec.
> >>>>>>>>
> >>>>>>>>> fluster check if v4l2slh265dec is working fine with this command line:
> >>>>>>>>>
> >>>>>>>>> gst-launch-1.0 appsrc num-buffers=0 ! h265parse ! v4l2slh265dec ! fakesink
> >>>>>>>>>
> >>>>>>>>> so if one of them is missing it won't work.
> >>>>>>>> gst-launch-1.0 appsrc num-buffers=0 ! h265parse ! v4l2slh265dec ! fakesink
> >>>>>>>> Setting pipeline to PAUSED ...
> >>>>>>>> 0:00:00.098389938 526 0xaaaaf9d86ac0 ERROR v4l2codecs-decoder
> >>>>>>>> gstv4l2decoder.c:725:gst_v4l2_decoder_get_controls:<v4l2decoder2>
> >>>>>>>> VIDIOC_G_EXT_CTRLS failed: Invalid argument
> >>>>>>>> ERROR: from element
> >>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Driver did not
> >>>>>>>> report framing and start code method.
> >>>>>>>> Additional debug info:
> >>>>>>>> ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codech265dec.c(155):
> >>>>>>>> gst_v4l2_codec_h265_dec_open ():
> >>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
> >>>>>>>> gst_v4l2_decoder_get_controls() failed: Invalid argument
> >>>>>>>> ERROR: pipeline doesn't want to preroll.
> >>>>>>>> ERROR: from element
> >>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Could not
> >>>>>>>> initialize supporting library.
> >>>>>>>> Additional debug info:
> >>>>>>>> ../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c(2909):
> >>>>>>>> gst_video_decoder_change_state ():
> >>>>>>>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
> >>>>>>>> Failed to open decoder
> >>>>>>>> ERROR: pipeline doesn't want to preroll.
> >>>>>>>> Failed to set pipeline to PAUSED.
> >>>>>>>> Setting pipeline to NULL ...
> >>>>>>>> Freeing pipeline ...
> >>>>>>>>
> >>>>>>>> Does this mean I have a wrong version of the kernel and/or incomplete patches?
> >>>>>>> I double checked the branches.
> >>>>>>>
> >>>>>>> Kernel:
> >>>>>>> https://gitlab.collabora.com/benjamin.gaignard/for-upstream.git
> >>>>>>> branch: origin/HEVC_UAPI_V4
> >>>>>>>
> >>>>>>> Gstreamer:
> >>>>>>> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer.git
> >>>>>>> branch: origin/benjamin.gaignard1/gstreamer-HEVC_aligned_with_kernel_5.15
> >>>>>>>
> >>>>>>>
> >>>>>>> I am still not able to run h.265/HEVC tests.
> >>>>>> Hello Adam,
> >>>>>>
> >>>>>> I have updated the following branches with the versions I have used today:
> >>>>>>
> >>>>>> Kernel:
> >>>>>> https://gitlab.collabora.com/benjamin.gaignard/for-upstream.git
> >>>>>> branch: origin/HEVC_UAPI_V5 only one change in documentation vs version 4 but rebased in v5.18-rc1
> >>>>>>
> >>>>>> Gstreamer:
> >>>>>> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer.git
> >>>>>> branch: origin/benjamin.gaignard1/gstreamer-HEVC_aligned_with_kernel_5.15 updated on the latest GST main branch
> >>>>>>
> >>>>>> I hope this will work fine this time.
> >>>>> I wish I had better news for you:
> >>>>>
> >>>>> dmesg shows the hantro driver is being loaded:
> >>>>>
> >>>>> [ 38.612243] hantro-vpu 38300000.video-codec: registered
> >>>>> nxp,imx8mq-vpu-g1-dec as /dev/video0
> >>>>> [ 38.612618] hantro-vpu 38310000.video-codec: registered
> >>>>> nxp,imx8mq-vpu-g2-dec as /dev/video1
> >>>>>
> >>>>> # gst-inspect-1.0 |grep 265
> >>>>> libav: avdec_h265: libav HEVC (High Efficiency Video Coding) decoder
> >>>>> rtp: rtph265depay: RTP H265 depayloader
> >>>>> rtp: rtph265pay: RTP H265 payloader
> >>>>> typefindfunctions: video/x-h265: h265, x265, 265
> >>>>> v4l2codecs: v4l2slh265dec: V4L2 Stateless H.265 Video Decoder
> >>>>> videoparsersbad: h265parse: H.265 parser
> >>>>>
> >>>>> Fluster reports:
> >>>>> GStreamer-H.265-V4L2SL-Gst1.0: GStreamer H.265 V4L2SL decoder for
> >>>>> GStreamer 1.0... ❌
> >>>> Still the same error about non supported control ?
> >>> # gst-lagst-launch-1.0 appsrc num-buffers=0 ! h265parse !
> >>> v4l2slh265dec ! fakesink
> >>> Setting pipeline to PAUSED ...
> >>> 0:00:01.704385508 420 0xaaaaec0a76c0 ERROR v4l2codecs-decoder
> >>> gstv4l2decoder.c:725:gst_v4l2_decoder_get_controls:<v4l2decoder2>
> >>> VIDIOC_G_EXT_CTRLS failed: Invalid argument
> >>> ERROR: from element
> >>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Driver did not
> >>> report framing and start code method.
> >>> Additional debug info:
> >>> ../subprojects/gst-plugins-bad/sys/v4l2codecs/gstv4l2codech265dec.c(155):
> >>> gst_v4l2_codec_h265_dec_open ():
> >>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
> >>> gst_v4l2_decoder_get_controls() failed: Invalid argument
> >>> ERROR: pipeline doesn't want to preroll.
> >>> ERROR: from element
> >>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0: Could not
> >>> initialize supporting library.
> >>> Additional debug info:
> >>> ../subprojects/gst-plugins-base/gst-libs/gst/video/gstvideodecoder.c(2909):
> >>> gst_video_decoder_change_state ():
> >>> /GstPipeline:pipeline0/v4l2slh265dec:v4l2slh265dec0:
> >>> Failed to open decoder
> >>> ERROR: pipeline doesn't want to preroll.
> >>> Failed to set pipeline to PAUSED.
> >>> Setting pipeline to NULL ...
> >>> Freeing pipeline ...
> >> What is the result of v4l2-ctl ?
> >> Here I have:
> >> v4l2-ctl --all -d 1
> >> Driver Info:
> >> Driver name : hantro-vpu
> >> Card type : nxp,imx8mq-vpu-g2-dec
> >> Bus info : platform: hantro-vpu
> >> Driver version : 5.18.0
> >> Capabilities : 0x84204000
> >> Video Memory-to-Memory Multiplanar
> >> Streaming
> >> Extended Pix Format
> >> Device Capabilities
> >> Device Caps : 0x04204000
> >> Video Memory-to-Memory Multiplanar
> >> Streaming
> >> Extended Pix Format
> >> Media Driver Info:
> >> Driver name : hantro-vpu
> >> Model : hantro-vpu
> >> Serial :
> >> Bus info : platform: hantro-vpu
> >> Media version : 5.18.0
> >> Hardware revision: 0x00000000 (0)
> >> Driver version : 5.18.0
> >> Interface Info:
> >> ID : 0x0300000c
> >> Type : V4L Video
> >> Entity Info:
> >> ID : 0x00000001 (1)
> >> Name : nxp,imx8mq-vpu-g2-dec-source
> >> Function : V4L2 I/O
> >> Pad 0x01000002 : 0: Source
> >> Link 0x02000008: to remote pad 0x1000004 of entity 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable
> >> Priority: 2
> >> Format Video Capture Multiplanar:
> >> Width/Height : 48/48
> >> Pixel Format : 'VT12' (Y/CbCr 4:2:0 (4x4 Linear))
> >> Field : None
> >> Number of planes : 1
> >> Flags :
> >> Colorspace : JPEG
> >> Transfer Function : Default
> >> YCbCr/HSV Encoding: Default
> >> Quantization : Default
> >> Plane 0 :
> >> Bytes per Line : 48
> >> Size Image : 3600
> >> Format Video Output Multiplanar:
> >> Width/Height : 48/48
> >> Pixel Format : 'S265' (HEVC Parsed Slice Data)
> >> Field : None
> >> Number of planes : 1
> >> Flags :
> >> Colorspace : JPEG
> >> Transfer Function : Default
> >> YCbCr/HSV Encoding: Default
> >> Quantization : Default
> >> Plane 0 :
> >> Bytes per Line : 0
> >> Size Image : 4608
> >>
> >> User Controls
> >>
> >> hantro_hevc_slice_header_skip_b 0x00981a80 (int) : min=0 max=256 step=1 default=0 value=0
> >>
> >> Codec Controls
> >>
> >> hevc_profile 0x00990b67 (menu) : min=0 max=2 default=0 value=0
> >> 0: Main
> >> 1: Main Still Picture
> >> 2: Main 10
> >> hevc_level 0x00990b68 (menu) : min=0 max=8 default=0 value=0
> >> 0: 1
> >> 1: 2
> >> 2: 2.1
> >> 3: 3
> >> 4: 3.1
> >> 5: 4
> >> 6: 4.1
> >> 7: 5
> >> 8: 5.1
> >>
> >> Stateless Codec Controls
> >>
> >> vp9_frame_decode_parameters 0x00a40a2c (unknown): type=261 flags=has-payload
> >> vp9_probabilities_updates 0x00a40a2d (unknown): type=260 flags=has-payload
> >> hevc_sequence_parameter_set 0x00a40a90 (unknown): type=270 flags=has-payload
> >> hevc_picture_parameter_set 0x00a40a91 (unknown): type=271 flags=has-payload
> >> hevc_scaling_matrix 0x00a40a93 (unknown): type=273 flags=has-payload
> >> hevc_decode_parameters 0x00a40a94 (unknown): type=274 flags=has-payload
> >> hevc_decode_mode 0x00a40a95 (menu) : min=1 max=1 default=1 value=1
> >> 1: Frame-Based
> >> hevc_start_code 0x00a40a96 (menu) : min=1 max=1 default=1 value=1
> >> 1: Annex B Start Code
> >>
> > Mine looks like:
> >
> > # v4l2-ctl --all -d 1
> > Driver Info:
> > Driver name : hantro-vpu
> > Card type : nxp,imx8mq-vpu-g2-dec
> > Bus info : platform: hantro-vpu
> > Driver version : 5.18.0
> > Capabilities : 0x84204000
> > Video Memory-to-Memory Multiplanar
> > Streaming
> > Extended Pix Format
> > Device Capabilities
> > Device Caps : 0x04204000
> > Video Memory-to-Memory Multiplanar
> > Streaming
> > Extended Pix Format
> > Media Driver Info:
> > Driver name : hantro-vpu
> > Model : hantro-vpu
> > Serial :
> > Bus info : platform: hantro-vpu
> > Media version : 5.18.0
> > Hardware revision: 0x00000000 (0)
> > Driver version : 5.18.0
> > Interface Info:
> > ID : 0x0300000c
> > Type : V4L Video
> > Entity Info:
> > ID : 0x00000001 (1)
> > Name : nxp,imx8mq-vpu-g2-dec-source
> > Function : V4L2 I/O
> > Pad 0x01000002 : 0: Source
> > Link 0x02000008: to remote pad 0x1000004 of entity
> > 'nxp,imx8mq-vpu-g2-dec-proc': Data, Enabled, Immutable
> > Priority: 2
> > Format Video Capture Multiplanar:
> > Width/Height : 48/48
> > Pixel Format : 'VT12' (Y/CbCr 4:2:0 (4x4 Linear))
> > Field : None
> > Number of planes : 1
> > Flags :
> > Colorspace : JPEG
> > Transfer Function : Default
> > YCbCr/HSV Encoding: Default
> > Quantization : Default
> > Plane 0 :
> > Bytes per Line : 48
> > Size Image : 3600
> > Format Video Output Multiplanar:
> > Width/Height : 48/48
> > Pixel Format : 'S265' (HEVC Parsed Slice Data)
> > Field : None
> > Number of planes : 1
> > Flags :
> > Colorspace : JPEG
> > Transfer Function : Default
> > YCbCr/HSV Encoding: Default
> > Quantization : Default
> > Plane 0 :
> > Bytes per Line : 0
> > Size Image : 4608
> >
> > User Controls
> >
> > hantro_hevc_slice_header_skip_b 0x00981a80 (int) : min=0 max=256
> > step=1 default=0 value=0
> >
> > Codec Controls
> >
> > hevc_profile 0x00990b67 (menu) : min=0 max=2
> > default=0 value=0
> > 0: Main
> > 1: Main Still Picture
> > 2: Main 10
> > hevc_level 0x00990b68 (menu) : min=0 max=8
> > default=0 value=0
> > 0: 1
> > 1: 2
> > 2: 2.1
> > 3: 3
> > 4: 3.1
> > 5: 4
> > 6: 4.1
> > 7: 5
> > 8: 5.1
> >
> > Stateless Codec Controls
> >
> > vp9_frame_decode_parameters 0x00a40a2c (unknown): type=261 flags=has-payload
> > vp9_probabilities_updates 0x00a40a2d (unknown): type=260 flags=has-payload
> > hevc_sequence_parameter_set 0x00a40a90 (unknown): type=270 flags=has-payload
> > hevc_picture_parameter_set 0x00a40a91 (unknown): type=271 flags=has-payload
> > hevc_scaling_matrix 0x00a40a93 (unknown): type=273 flags=has-payload
> > hevc_decode_parameters 0x00a40a94 (unknown): type=274 flags=has-payload
> > hevc_decode_mode 0x00a40a95 (menu) : min=1 max=1
> > default=1 value=1
> > 1: Frame-Based
> > hevc_start_code 0x00a40a96 (menu) : min=1 max=1
> > default=1 value=1
> > 1: Annex B Start Code
>
> It is the same so that suggest the issue is coming from GStreamer plugin.
Do I need to build Gtreamer in a special way? I just invoked meson
then ninja, but I didn't pass any additional parameters other than the
build directory name.
adam
>
> >
> >>>> Benjamin
> >>>>
> >>>>> adam
> >>>>>> Benjamin
> >>>>>>
> >>>>>>> adam
> >>>>>>>> adam
> >>>>>>>>> Regards,
> >>>>>>>>> Benjamin
> >>>>>>>>>
> >>>>>>>>>>> adam
> >>>>>>>>>>>> Thanks,
> >>>>>>>>>>>> Benjamin
> >>>>>>>>>>>>
> >>>>>>>>>>>>> Benjamin
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Benjamin Gaignard (12):
> >>>>>>>>>>>>> media: uapi: HEVC: Add missing fields in HEVC controls
> >>>>>>>>>>>>> media: uapi: HEVC: Rename HEVC stateless controls with STATELESS
> >>>>>>>>>>>>> prefix
> >>>>>>>>>>>>> media: uapi: HEVC: Add document uAPI structure
> >>>>>>>>>>>>> media: uapi: HEVC: Define V4L2_CID_STATELESS_HEVC_SLICE_PARAMS
> >>>>>>>>>>>>> as a
> >>>>>>>>>>>>> dynamic array
> >>>>>>>>>>>>> media: uapi: Move parsed HEVC pixel format out of staging
> >>>>>>>>>>>>> media: uapi: Add V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS
> >>>>>>>>>>>>> control
> >>>>>>>>>>>>> media: uapi: Move the HEVC stateless control type out of staging
> >>>>>>>>>>>>> media: controls: Log HEVC stateless control in .std_log
> >>>>>>>>>>>>> media: uapi: Create a dedicated header for Hantro control
> >>>>>>>>>>>>> media: uapi: HEVC: fix padding in v4l2 control structures
> >>>>>>>>>>>>> media: uapi: Change data_bit_offset definition
> >>>>>>>>>>>>> media: uapi: move HEVC stateless controls out of staging
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Hans Verkuil (3):
> >>>>>>>>>>>>> videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
> >>>>>>>>>>>>> v4l2-ctrls: add support for dynamically allocated arrays.
> >>>>>>>>>>>>> vivid: add dynamic array test control
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> .../userspace-api/media/drivers/hantro.rst | 5 -
> >>>>>>>>>>>>> .../media/v4l/ext-ctrls-codec-stateless.rst | 833
> >>>>>>>>>>>>> ++++++++++++++++++
> >>>>>>>>>>>>> .../media/v4l/ext-ctrls-codec.rst | 780
> >>>>>>>>>>>>> ----------------
> >>>>>>>>>>>>> .../media/v4l/pixfmt-compressed.rst | 7 +-
> >>>>>>>>>>>>> .../media/v4l/vidioc-g-ext-ctrls.rst | 20 +
> >>>>>>>>>>>>> .../media/v4l/vidioc-queryctrl.rst | 8 +
> >>>>>>>>>>>>> .../media/videodev2.h.rst.exceptions | 5 +
> >>>>>>>>>>>>> .../media/test-drivers/vivid/vivid-ctrls.c | 15 +
> >>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-api.c | 103 ++-
> >>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-core.c | 198 ++++-
> >>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-defs.c | 37 +-
> >>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-priv.h | 3 +-
> >>>>>>>>>>>>> drivers/media/v4l2-core/v4l2-ctrls-request.c | 13 +-
> >>>>>>>>>>>>> drivers/staging/media/hantro/hantro_drv.c | 27 +-
> >>>>>>>>>>>>> drivers/staging/media/hantro/hantro_hevc.c | 8 +-
> >>>>>>>>>>>>> drivers/staging/media/sunxi/cedrus/cedrus.c | 24 +-
> >>>>>>>>>>>>> .../staging/media/sunxi/cedrus/cedrus_dec.c | 10 +-
> >>>>>>>>>>>>> .../staging/media/sunxi/cedrus/cedrus_h265.c | 2 +-
> >>>>>>>>>>>>> include/media/hevc-ctrls.h | 250 ------
> >>>>>>>>>>>>> include/media/v4l2-ctrls.h | 48 +-
> >>>>>>>>>>>>> include/uapi/linux/hantro-media.h | 19 +
> >>>>>>>>>>>>> include/uapi/linux/v4l2-controls.h | 439 +++++++++
> >>>>>>>>>>>>> include/uapi/linux/videodev2.h | 13 +
> >>>>>>>>>>>>> 23 files changed, 1697 insertions(+), 1170 deletions(-)
> >>>>>>>>>>>>> delete mode 100644 include/media/hevc-ctrls.h
> >>>>>>>>>>>>> create mode 100644 include/uapi/linux/hantro-media.h
> >>>>>>>>>>>>>
More information about the linux-arm-kernel
mailing list