[PATCH] ARM: dts: ux500: Register Amstaos proximity sensor

[Linus Walleij]

The proximity sensor on the Codina is actually an
Amstaos TMD2672, not Mouser, so alter the DTS to reflect this.
Tested successfully with the IIO driver.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
 arch/arm/boot/dts/ste-ux500-samsung-codina.dts | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 1c1725d31c7c..5ce8e224505c 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -515,10 +515,9 @@ i2c at 80004000 {
 			pinctrl-0 = <&i2c0_a_1_default>;
 			pinctrl-1 = <&i2c0_a_1_sleep>;
 
-			/* TODO: write bindings and driver for this proximity sensor */
 			proximity at 39 {
-				/* Codina has the Mouser TMD2672 */
-				compatible = "mouser,tmd2672";
+				/* Codina has the Amstaos TMD2672 */
+				compatible = "amstaos,tmd2672";
 				clock-frequency = <400000>;
 				reg = <0x39>;
 
-- 
2.35.1