[PATCH] arm64/io: Remind compiler that there is a memory side effect

[Mark Rutland]

Hi Jeremy,

Thanks for raising this.

On Fri, Apr 01, 2022 at 11:44:06AM -0500, Jeremy Linton wrote:
> The relaxed variants of read/write macros are only declared
> as `asm volatile()` which forces the compiler to generate the
> instruction in the code path as intended. The only problem
> is that it doesn't also tell the compiler that there may
> be memory side effects. Meaning that if a function is comprised
> entirely of relaxed io operations, the compiler may think that
> it only has register side effects and doesn't need to be called.

As I mentioned on a private mail, I don't think that reasoning above is
correct, and I think this is a miscompilation (i.e. a compiler bug).

The important thing is that any `asm volatile` may have a side effects
generally outside of memory or GPRs, and whether the assembly contains a memory
load/store is immaterial. We should not need to add a memory clobber in order
to retain the volatile semantic.

See:
	
  https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile

... and consider the x86 example that reads rdtsc, or an arm64 sequence like:

| void do_sysreg_thing(void)
| {
| 	unsigned long tmp;
| 	
| 	tmp = read_sysreg(some_reg);
| 	tmp |= SOME_BIT;
| 	write_sysreg(some_reg);
| }

... where there's no memory that we should need to hazard against.

This patch might workaround the issue, but I don't believe it is a correct fix.

> For an example function look at bcmgenet_enable_dma(), before the
> relaxed variants were removed. When built with gcc12 the code
> contains the asm blocks as expected, but then the function is
> never called.

So it sounds like this is a regression in GCC 12, which IIUC isn't released yet
per:

  https://gcc.gnu.org/gcc-12/changes.html

... which says:

| Note: GCC 12 has not been released yet

Surely we can fix it prior to release?

Thanks,
Mark.

> 
> Signed-off-by: Jeremy Linton <jeremy.linton at arm.com>
> ---
>  arch/arm64/include/asm/io.h | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
> index 7fd836bea7eb..3cceda7948a0 100644
> --- a/arch/arm64/include/asm/io.h
> +++ b/arch/arm64/include/asm/io.h
> @@ -24,25 +24,25 @@
>  #define __raw_writeb __raw_writeb
>  static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
>  {
> -	asm volatile("strb %w0, [%1]" : : "rZ" (val), "r" (addr));
> +	asm volatile("strb %w0, [%1]" : : "rZ" (val), "r" (addr) : "memory");
>  }
>  
>  #define __raw_writew __raw_writew
>  static inline void __raw_writew(u16 val, volatile void __iomem *addr)
>  {
> -	asm volatile("strh %w0, [%1]" : : "rZ" (val), "r" (addr));
> +	asm volatile("strh %w0, [%1]" : : "rZ" (val), "r" (addr) : "memory");
>  }
>  
>  #define __raw_writel __raw_writel
>  static __always_inline void __raw_writel(u32 val, volatile void __iomem *addr)
>  {
> -	asm volatile("str %w0, [%1]" : : "rZ" (val), "r" (addr));
> +	asm volatile("str %w0, [%1]" : : "rZ" (val), "r" (addr) : "memory");
>  }
>  
>  #define __raw_writeq __raw_writeq
>  static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
>  {
> -	asm volatile("str %x0, [%1]" : : "rZ" (val), "r" (addr));
> +	asm volatile("str %x0, [%1]" : : "rZ" (val), "r" (addr) : "memory");
>  }
>  
>  #define __raw_readb __raw_readb
> -- 
> 2.35.1
>