[PATCH v2 07/12] irqchip/irq-brcmstb-l2: Switch to IRQCHIP_PLATFORM_DRIVER

Florian Fainelli f.fainelli at gmail.com
Mon Sep 27 19:27:10 PDT 2021


Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/irqchip/Kconfig          |  4 +++-
 drivers/irqchip/irq-brcmstb-l2.c | 16 +++++++++-------
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 3022f6137096..dfe54bf9b35f 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -128,7 +128,9 @@ config BCM7120_L2_IRQ
 	select IRQ_DOMAIN
 
 config BRCMSTB_L2_IRQ
-	bool
+	tristate "Broadcom STB generic L2 interrupt controller driver"
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC
+	default ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
diff --git a/drivers/irqchip/irq-brcmstb-l2.c b/drivers/irqchip/irq-brcmstb-l2.c
index 8e0911561f2d..e4efc08ac594 100644
--- a/drivers/irqchip/irq-brcmstb-l2.c
+++ b/drivers/irqchip/irq-brcmstb-l2.c
@@ -275,16 +275,18 @@ static int __init brcmstb_l2_edge_intc_of_init(struct device_node *np,
 {
 	return brcmstb_l2_intc_of_init(np, parent, &l2_edge_intc_init);
 }
-IRQCHIP_DECLARE(brcmstb_l2_intc, "brcm,l2-intc", brcmstb_l2_edge_intc_of_init);
-IRQCHIP_DECLARE(brcmstb_hif_spi_l2_intc, "brcm,hif-spi-l2-intc",
-		brcmstb_l2_edge_intc_of_init);
-IRQCHIP_DECLARE(brcmstb_upg_aux_aon_l2_intc, "brcm,upg-aux-aon-l2-intc",
-		brcmstb_l2_edge_intc_of_init);
 
 static int __init brcmstb_l2_lvl_intc_of_init(struct device_node *np,
 	struct device_node *parent)
 {
 	return brcmstb_l2_intc_of_init(np, parent, &l2_lvl_intc_init);
 }
-IRQCHIP_DECLARE(bcm7271_l2_intc, "brcm,bcm7271-l2-intc",
-	brcmstb_l2_lvl_intc_of_init);
+
+IRQCHIP_PLATFORM_DRIVER_BEGIN(brcmstb_l2)
+IRQCHIP_MATCH("brcm,l2-intc", brcmstb_l2_edge_intc_of_init)
+IRQCHIP_MATCH("brcm,hif-spi-l2-intc", brcmstb_l2_edge_intc_of_init)
+IRQCHIP_MATCH("brcm,upg-aux-aon-l2-intc", brcmstb_l2_edge_intc_of_init)
+IRQCHIP_MATCH("brcm,bcm7271-l2-intc", brcmstb_l2_lvl_intc_of_init)
+IRQCHIP_PLATFORM_DRIVER_END(brcmstb_l2)
+MODULE_DESCRIPTION("Broadcom STB generic L2 interrupt controller");
+MODULE_LICENSE("GPL v2");
-- 
2.25.1




More information about the linux-arm-kernel mailing list