[PATCH 2/4] i2c: stm32f7: recover the bus on access timeout

[Pierre Yves MORDRET]

Hi Alain

Look good to me

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret at foss.st.com>

Regards

On 9/20/21 5:21 PM, Alain Volmat wrote:
> When getting an access timeout, ensure that the bus is in a proper
> state prior to returning the error.
> 
> Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
> 
> Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
> ---
>  drivers/i2c/busses/i2c-stm32f7.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index ed977b6f7ab6..ad3459a3bc5e 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1712,6 +1712,7 @@ static int stm32f7_i2c_xfer(struct i2c_adapter *i2c_adap,
>  			i2c_dev->msg->addr);
>  		if (i2c_dev->use_dma)
>  			dmaengine_terminate_all(dma->chan_using);
> +		stm32f7_i2c_wait_free_bus(i2c_dev);
>  		ret = -ETIMEDOUT;
>  	}
>  
> @@ -1769,6 +1770,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
>  		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
>  		if (i2c_dev->use_dma)
>  			dmaengine_terminate_all(dma->chan_using);
> +		stm32f7_i2c_wait_free_bus(i2c_dev);
>  		ret = -ETIMEDOUT;
>  		goto pm_free;
>  	}
> 

-- 
--
~ Py MORDRET
--