[PATCH 3/3] arm64: dts: rockchip: add phandles to muxed i2c buses on rk3368-lion

Heiko Stuebner heiko at sntech.de
Wed Sep 22 16:04:29 PDT 2021


From: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>

Other DTS files that include the dtsi will want to to add children
to the i2c buses from the i2c-mus. Without a label they would have to
specify the full path.

Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>
[add phandles for first mux as well]
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index 8e82ca3f1c6f..5753e57fd716 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -29,15 +29,15 @@ i2cmux1 {
 		i2c-parent = <&i2c1>;
 		mux-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
 
-		/* Q7_GPO_I2C */
-		i2c at 0 {
+		/* Q7_GP0_I2C */
+		i2c_gp0: i2c at 0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
 		/* Q7_SMB */
-		i2c at 1 {
+		i2c_smb: i2c at 1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -52,7 +52,7 @@ i2cmux2 {
 		mux-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
 
 		/* Q7_LVDS_BLC_I2C */
-		i2c at 0 {
+		i2c_lvds_blc: i2c at 0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -69,8 +69,8 @@ rtc_twi: rtc at 6f {
 			};
 		};
 
-		/* Q7_GP2_I2C */
-		i2c at 1 {
+		/* Q7_GP2_I2C = LVDS_DID_CLK/DAT */
+		i2c_gp2: i2c at 1 {
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.29.2




More information about the linux-arm-kernel mailing list