[PATCH] arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio

Neil Armstrong narmstrong at baylibre.com
Mon Sep 20 01:23:47 PDT 2021


Hi,

On 19/09/2021 23:31, Anand Moon wrote:
> As described in the Odroid-n2 & Odroid-n2-plus schematics,
> the 5V regulator is controlled by GPIOH_8 and in Open Drain
> since this GPIO doesn't support Push-Pull.
>

Fixes: c35f6dc5c377 ("arm64: dts: meson: Add minimal support for Odroid-N2")
Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi")

> Cc: Neil Armstrong <narmstrong at baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon at gmail.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 4f33820aba1f..e8a00a2f8812 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -99,6 +99,8 @@ vcc_5v: regulator-vcc_5v {
>  		regulator-max-microvolt = <5000000>;
>  		regulator-always-on;
>  		vin-supply = <&main_12v>;
> +		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
> +		enable-active-high;
>  	};
>  
>  	vcc_1v8: regulator-vcc_1v8 {
> 

Exact

I wonder how I missed this....

Acked-by: Neil Armstrong <narmstrong at baylibre.com>

Thanks,
Neil



More information about the linux-arm-kernel mailing list