[PATCH v2] ARM: dts: aspeed: rainier: Add N_MODE_VREF gpio

Joel Stanley joel at jms.id.au
Tue Sep 14 01:49:11 PDT 2021


On Fri, 10 Sept 2021 at 19:54, Adriana Kobylak <anoo at linux.ibm.com> wrote:
>
> From: Adriana Kobylak <anoo at us.ibm.com>
>
> The N_MODE_VREF gpio is designed to be used to specify how many power
> supplies the system should have (2 or 4).  If enough power supplies fail
> so that the system no longer has redundancy (no longer n+1), the
> hardware will signal to the Onboard Chip Controller that the system may
> be oversubscribed, and performance may need to be reduced so the system
> can maintain it's powered on state. This gpio is on a 9552, populate all
> the gpios on that chip for completeness.
>
> Signed-off-by: Adriana Kobylak <anoo at us.ibm.com>
> ---
>
> v2: Update commit message.
>
>  arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 103 +++++++++++++++++++
>  1 file changed, 103 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index 6fd3ddf97a21..d5eea86dc260 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -1502,6 +1502,109 @@ eeprom at 51 {
>                 reg = <0x51>;
>         };
>
> +       pca_pres3: pca9552 at 60 {
> +               compatible = "nxp,pca9552";
> +               reg = <0x60>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               gpio-line-names =
> +                       "",
> +                       "APSS_RESET_N",
> +                       "", "", "", "",
> +                       "P10_DCM0_PRES",
> +                       "P10_DCM1_PRES",
> +                       "", "",
> +                       "N_MODE_CPU_N",
> +                       "",
> +                       "PRESENT_VRM_DCM0_N",
> +                       "PRESENT_VRM_DCM1_N",
> +                       "N_MODE_VREF",

Should any (all?) of these names be documented?

https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md


> +                       "";
> +
> +               gpio at 0 {
> +                       reg = <0>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 1 {
> +                       reg = <1>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 2 {
> +                       reg = <2>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 3 {
> +                       reg = <3>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 4 {
> +                       reg = <4>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 5 {
> +                       reg = <5>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 6 {
> +                       reg = <6>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 7 {
> +                       reg = <7>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 8 {
> +                       reg = <8>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 9 {
> +                       reg = <9>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 10 {
> +                       reg = <10>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 11 {
> +                       reg = <11>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 12 {
> +                       reg = <12>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 13 {
> +                       reg = <13>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 14 {
> +                       reg = <14>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +
> +               gpio at 15 {
> +                       reg = <15>;
> +                       type = <PCA955X_TYPE_GPIO>;
> +               };
> +       };
> +
>         pca_pres2: pca9552 at 61 {
>                 compatible = "nxp,pca9552";
>                 reg = <0x61>;
> --
> 2.25.1
>



More information about the linux-arm-kernel mailing list