[PATCH AUTOSEL 5.14 154/252] arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config

Sasha Levin sashal at kernel.org
Thu Sep 9 04:39:28 PDT 2021


From: Tim Harvey <tharvey at gateworks.com>

[ Upstream commit 500659f3b401fe6ffd1d63f2449d16d8a4204db7 ]

The GW700x PMIC does not have an interrupt. Remove the invalid pin
config.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
Signed-off-by: Shawn Guo <shawnguo at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 11dda79cc46b..00f86cada30d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -278,8 +278,6 @@ rtc at 68 {
 
 	pmic at 69 {
 		compatible = "mps,mp5416";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x69>;
 
 		regulators {
@@ -444,12 +442,6 @@ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
 		>;
 	};
 
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
-		>;
-	};
-
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
-- 
2.30.2




More information about the linux-arm-kernel mailing list