[PATCH 2/3] arm64: dts: ti: iot2050: Disable SR2.0-only PRUs

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka at siemens.com>

The IOT2050 devices described so far are using SR1.0 silicon, thus do
not have the additional PRUs of the ICSSG of the SR2.0. Disable them.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
 .../boot/dts/ti/k3-am65-iot2050-common.dtsi   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index da7d2be48f6f..fb3f3e4ed753 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -720,3 +720,27 @@ &icssg1_mdio {
 &icssg2_mdio {
 	status = "disabled";
 };
+
+&tx_pru0_0 {
+	status = "disabled";
+};
+
+&tx_pru0_1 {
+	status = "disabled";
+};
+
+&tx_pru1_0 {
+	status = "disabled";
+};
+
+&tx_pru1_1 {
+	status = "disabled";
+};
+
+&tx_pru2_0 {
+	status = "disabled";
+};
+
+&tx_pru2_1 {
+	status = "disabled";
+};
-- 
2.31.1