[PATCH v3 16/18] arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core

Lucas Stach l.stach at pengutronix.de
Mon Sep 6 11:43:31 PDT 2021


From: Frieder Schrempf <frieder.schrempf at kontron.de>

According to the documents, the i.MX8M-Mini features a GC320 and a
GCNanoUltra GPU core. Etnaviv detects them as:

	etnaviv-gpu 38000000.gpu: model: GC600, revision: 4653
	etnaviv-gpu 38008000.gpu: model: GC520, revision: 5341

This seems to work fine more or less without any changes to the HWDB,
which still might be needed in the future to correct some features,
etc.

[lst]: Added power domains and switched clock assignments to the
       new clock defines used for the composite clocks, instead of
       relying on the backwards compat defines.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 772f60bfe31e..87198f7ea6df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1138,6 +1138,37 @@ gpmi: nand-controller at 33002000{
 			status = "disabled";
 		};
 
+		gpu_3d: gpu at 38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
+				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
+			clock-names = "reg", "bus", "core", "shader";
+			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
+					  <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-rates = <0>, <1000000000>;
+			power-domains = <&pgc_gpu>;
+		};
+
+		gpu_2d: gpu at 38008000 {
+			compatible = "vivante,gc";
+			reg = <0x38008000 0x8000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
+				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
+				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
+			clock-names = "reg", "bus", "core";
+			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
+					  <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
+			assigned-clock-rates = <0>, <1000000000>;
+			power-domains = <&pgc_gpu>;
+		};
+
 		gic: interrupt-controller at 38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>, /* GIC Dist */
-- 
2.30.2




More information about the linux-arm-kernel mailing list