[PATCH 1/2] arm64: dts: hisilicon: Add support for Hikey 970 PMIC

Mauro Carvalho Chehab mchehab+huawei at kernel.org
Thu Sep 2 04:55:23 PDT 2021


Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.

As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei at kernel.org>
---
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 22 +----
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  2 +-
 .../boot/dts/hisilicon/hikey970-pmic.dtsi     | 86 +++++++++++++++++++
 3 files changed, 90 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index d8abf442ee7e..7c32f5fd5cc5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
 
 #include "hi3670.dtsi"
 #include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
 
 / {
 	model = "HiKey970";
@@ -39,23 +40,6 @@ memory at 0 {
 		reg = <0x0 0x0 0x0 0x0>;
 	};
 
-	sd_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	sd_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
 	wlan_en: wlan-en-1-8v {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
 	pinctrl-0 = <&sd_pmx_func
 		     &sd_clk_cfg_func
 		     &sd_cfg_func>;
-	vmmc-supply = <&sd_3v3>;
-	vqmmc-supply = <&sd_1v8>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 20698cfd0637..636c8817df7e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -669,7 +669,7 @@ ufs: ufs at ff3c0000 {
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
-				<&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+				 <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
 			clock-names = "ref_clk", "phy_clk";
 			freq-table-hz = <0 0
 					 0 0>;
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..970047f2dabd
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	spmi: spmi at fff24000 {
+		compatible = "hisilicon,kirin970-spmi-controller";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		status = "okay";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
+		hisilicon,spmi-channel = <2>;
+
+		pmic: pmic at 0 {
+			compatible = "hisilicon,hi6421-spmi";
+			reg = <0 SPMI_USID>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpios = <&gpio28 0 0>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ldo3: ldo3 { /* HDMI */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-boot-on;
+				};
+
+				ldo4: ldo4 { /* 40 PIN */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1725000>;
+					regulator-max-microvolt = <1900000>;
+					regulator-boot-on;
+				};
+
+				ldo9: ldo9 { /* SDCARD I/O */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1750000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo15: ldo15 { /* UFS */
+					regulator-name = "ldo15";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo16: ldo16 { /* SD */
+					regulator-name = "ldo16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldo17: ldo17 { /* USB HUB */
+					regulator-name = "ldo17";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo33: ldo33 { /* PEX8606 */
+					regulator-name = "ldo33";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo34: ldo34 { /* GPS AUX IN VDD */
+					regulator-name = "ldo34";
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <3300000>;
+				};
+			};
+		};
+	};
+};
-- 
2.31.1




More information about the linux-arm-kernel mailing list