[PATCH] arm64: dts: rockchip: helios64: define usb hub and 2.5GbE nic

Florian Klink flokli at flokli.de
Thu Oct 28 09:35:32 PDT 2021


On 21-10-26 10:07:47, Dennis Gilmore wrote:
>Add the 4 ports on the internal hub and define and turn on the 2.5GbE
>nic.
>
>Signed-off-by: Dennis Gilmore <dgilmore at redhat.com>

Tested-by: Florian Klink <flokli at flokli.de>

>---
> .../dts/rockchip/rk3399-kobol-helios64.dts    | 55 +++++++++++++++++++
> 1 file changed, 55 insertions(+)
>
>diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
>index 26d45cf7ce00..1ffddf860375 100644
>--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
>+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
>@@ -125,6 +125,18 @@ pcie_power: pcie-power {
> 		vin-supply = <&vcc5v0_perdev>;
> 	};
>
>+	usblan_power: usblan-power {
>+		compatible = "regulator-fixed";
>+		enable-active-high;
>+		gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
>+		pinctrl-names = "default";
>+		pinctrl-0 = <&usb_lan_en>;
>+		regulator-name = "usblan_power";
>+		regulator-always-on;
>+		regulator-boot-on;
>+		vin-supply = <&vcc5v0_usb>;
>+	};
>+
> 	vcc1v8_sys_s0: vcc1v8-sys-s0 {
> 		compatible = "regulator-fixed";
> 		regulator-name = "vcc1v8_sys_s0";
>@@ -465,6 +477,11 @@ hdd_b_power_en: hdd-b-power-en {
> 		vcc5v0_usb_en: vcc5v0-usb-en {
> 			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> 		};
>+
>+		usb_lan_en: usb-lan-en {
>+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
>+		};
>+
> 	};
>
> 	vcc3v0-sd {
>@@ -563,5 +580,43 @@ &usbdrd3_1 {
> 	usb at fe900000 {
> 		dr_mode = "host";
> 		status = "okay";
>+
>+		#address-cells = <1>;
>+		#size-cells = <0>;
>+
>+		hub at 1 {
>+			compatible = "usb2109,0815";
>+			reg = <1>;
>+			#address-cells = <1>;
>+			#size-cells = <0>;
>+
>+			port at 1 {
>+				reg = <1>;
>+				#trigger-source-cells = <0>;
>+			};
>+
>+			port at 2 {
>+				reg = <2>;
>+				#trigger-source-cells = <0>;
>+			};
>+
>+			port at 3 {
>+				reg = <3>;
>+				#trigger-source-cells = <0>;
>+			};
>+
>+			device at 4 {
>+				compatible = "usbbda,8156";
>+				reg = <4>;
>+
>+				#address-cells = <2>;
>+				#size-cells = <0>;
>+
>+				interface at 0 {	/* interface 0 of configuration 1 */
>+					compatible = "usbbda,8156.config1.0";
>+					reg = <0 1>;
>+				};
>+			};
>+		};
> 	};
> };
>-- 
>2.32.0



More information about the linux-arm-kernel mailing list