[PATCH 02/13] arm: debug: reuse the config DEBUG_OMAP2UART{1, 2} for OMAP{3, 4, 5}

[Lukas Bulwahn]

Commit d2b310b0234c ("ARM: debug: Use generic 8250 debug_ll for omap2 and
omap3/4/5 common uarts") adds address definitions of DEBUG_UART_PHYS for
OMAP2, OMAP3, OMAP4 and OMAP5 in ./arch/arm/Kconfig.debug.

These definitions depend on DEBUG_OMAP{2,3,4,5}UART{1,2}; however, only
DEBUG_OMAP2UART{1,2} are defined in ./arch/arm/Kconfig.debug, and
DEBUG_OMAP{3,4,5}UART{1,2} are not defined. Hence, the script
./scripts/checkkconfigsymbols.py warns here on non-existing symbols.
Simply reuse the config DEBUG_OMAP2UART{1,2}; there is no need to define
separate config symbols for OMAP{3,4,5}. So, just delete the dead
references to DEBUG_OMAP{3,4,5}UART{1,2}.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn at gmail.com>
---
 arch/arm/Kconfig.debug | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 98436702e0c7..83484564b1d9 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1643,10 +1643,8 @@ config DEBUG_UART_PHYS
 	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0x48022000 if DEBUG_TI81XXUART2
 	default 0x48024000 if DEBUG_TI81XXUART3
-	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
@@ -1782,10 +1780,8 @@ config DEBUG_UART_VIRT
 	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0xfa022000 if DEBUG_TI81XXUART2
 	default 0xfa024000 if DEBUG_TI81XXUART3
-	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
 	default 0xfb002000 if DEBUG_CNS3XXX
-- 
2.26.2