[PATCH v11 0/5] arm64 userspace counter support
Mark Rutland
mark.rutland at arm.com
Tue Oct 26 06:10:39 PDT 2021
On Tue, Oct 19, 2021 at 06:19:02PM -0500, Rob Herring wrote:
> Another version of arm64 userspace counter access support.
>
> The arm64 support departs from the x86 implementation by requiring the user
> to explicitly request user access (via attr.config1) and only enables access
> for task bound events. Since usage is explicitly requested, access is
> enabled at perf_event_open() rather than on mmap() as that greatly
> simplifies the implementation. Rather than trying to lock down the access
> as the x86 implementation has been doing, we can start with only a limited
> use case enabled and later expand it if needed.
>
> I've run this version thru Vince's perf tests[13] with arm64 support added.
> I wish I'd found these tests sooner...
When you say "with arm64 support added", do you mean with patches not
yet upstreamed?
I took a look at the upstream repo, and there's some existing RDPMC
support even though upstream never previously supported userspace
access. That support code uses PMSELR_EL0, which this series adds no
provisions for.
Kernel-side, we'll need to either:
* Document that PMSELR_EL0 is unreliable, and explcitly zero it within
the kernel such that it cnanot be used as a covert channel. Get the
tests updated to not rely on the never-previously-supported use of
PMSELR_EL0.
* Context switch PMSELR_EL0 (which'll IIUC is unreliable for big.LITTLE,
even where the registers exist on each CPU).
Thanks,
Mark.
> This originally resurrected Raphael's series[1] to enable userspace counter
> access on arm64. My previous versions are here[2][3][4][5][6][7][8][9][10][11].
> A git branch is here[12].
>
> Changes in v11:
> - User request for 64-bit counters and userspace access will fail on
> open if h/w doesn't support 64-bit counters instead of reporting the
> maximum counter size. The open will also fail if not a task bound
> event.
>
> Changes in v10:
> - Drop changing event_mapped/event_unmapped ops to run on the event's
> current CPU. This won't work for x86 where any thread sharing an mm
> context will have rdpmc enabled. Instead, simply track user access
> events when added to a perf context and use that count.
> - Documentation for the sysctl disable
>
> Changes in v9:
> - Reworked x86 and perf core to handle user access tracking and call
> .event_mapped() and .event_unmapped() on the CPU with the event like
> other changes to events.
> - Use sysctl instead of sysfs to disable user access.
>
> Changes in v8:
> - Restrict user access to thread bound events which simplifies the
> implementation. A couple of perf core changes (patches 1 and 2) are
> needed to do this.
> - Always require the user to request userspace access.
>
> Changes in v7:
> - Handling of dirty counter leakage and reworking of context switch and
> user access enabling. The .sched_task hook and undef instruction handler
> are now utilized. (Patch 3)
> - Add a userspace disable switch like x86. (Patch 5)
>
> Changes in v6:
> - Reworking of the handling of 64-bit counters and user access. There's
> a new config1 flag to request user access. This takes priority over
> the 64-bit flag and the user will get the maximum size the h/w
> supports without chaining.
> - The libperf evsel mmap struct is stored in its own xyarray
> - New tests for user 64-bit and 32-bit counters
> - Rebase to v5.12-rc2
>
> Changes in v5:
> - Limit enabling/disabling access to CPUs associated with the PMU
> (supported_cpus) and with the mm_struct matching current->active_mm.
> The x86 method of using mm_cpumask doesn't work for arm64 as it is not
> updated.
> - Only set cap_user_rdpmc if event is on current cpu. See patch 2.
> - Create an mmap for every event in an evsel. This results in some changes
> to the libperf mmap API from the last version.
> - Rebase to v5.11-rc2
>
> Changes in v4:
> - Dropped 'arm64: pmu: Add hook to handle pmu-related undefined instructions'.
> The onus is on userspace to pin itself to a homogeneous subset of CPUs
> and avoid any aborts on heterogeneous systems, so the hook is not needed.
> - Make perf_evsel__mmap() take pages rather than bytes for size
> - Fix building arm64 heterogeneous test.
>
> Changes in v3:
> - Dropped removing x86 rdpmc test until libperf tests can run via 'perf test'
> - Added verbose prints for tests
> - Split adding perf_evsel__mmap() to separate patch
>
> The following changes to the arm64 support have been made compared to
> Raphael's last version:
>
> The major change is support for heterogeneous systems with some
> restrictions. Specifically, userspace must pin itself to like CPUs, open
> a specific PMU by type, and use h/w specific events. The tests have been
> reworked to demonstrate this.
>
> Chained events are not supported. The problem with supporting chained
> events was there's no way to distinguish between a chained event and a
> native 64-bit counter. We could add some flag, but do self monitoring
> processes really need that? Native 64-bit counters are supported if the
> PMU h/w has support. As there's already an explicit ABI to request 64-bit
> counters, userspace can request 64-bit counters and if user
> access is not enabled, then it must retry with 32-bit counters.
>
> Prior versions broke the build on arm32 (surprisingly never caught by
> 0-day). As a result, event_mapped and event_unmapped implementations have
> been moved into the arm64 code.
>
> There was a bug in that pmc_width was not set in the user page. The tests
> now check for this.
>
> The documentation has been converted to rST. I've added sections on
> chained events and heterogeneous.
>
> Rob
>
> [1] https://lore.kernel.org/r/20190822144220.27860-1-raphael.gault@arm.com/
> [2] https://lore.kernel.org/r/20200707205333.624938-1-robh@kernel.org/
> [3] https://lore.kernel.org/r/20200828205614.3391252-1-robh@kernel.org/
> [4] https://lore.kernel.org/r/20200911215118.2887710-1-robh@kernel.org/
> [5] https://lore.kernel.org/r/20201001140116.651970-1-robh@kernel.org/
> [6] https://lore.kernel.org/r/20210114020605.3943992-1-robh@kernel.org/
> [7] https://lore.kernel.org/r/20210311000837.3630499-1-robh@kernel.org/
> [8] https://lore.kernel.org/r/20210420031511.2348977-1-robh@kernel.org/
> [9] https://lore.kernel.org/r/20210517195405.3079458-1-robh@kernel.org/
> [10] https://lore.kernel.org/all/20210806225123.1958497-1-robh@kernel.org/
> [11] https://lore.kernel.org/all/20210914204800.3945732-1-robh@kernel.org/
> [12] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git arm64-user-perf-event-v11
> [13] https://github.com/deater/perf_event_tests
>
>
> Raphael Gault (1):
> Documentation: arm64: Document PMU counters access from userspace
>
> Rob Herring (4):
> x86: perf: Move RDPMC event flag to a common definition
> perf: Add a counter for number of user access events in context
> arm64: perf: Add userspace counter access disable switch
> arm64: perf: Enable PMU counter userspace access for perf event
>
> Documentation/admin-guide/sysctl/kernel.rst | 11 ++
> Documentation/arm64/perf.rst | 75 ++++++++++-
> arch/arm64/kernel/perf_event.c | 132 +++++++++++++++++++-
> arch/x86/events/core.c | 10 +-
> arch/x86/events/perf_event.h | 2 +-
> include/linux/perf_event.h | 10 ++
> kernel/events/core.c | 4 +
> 7 files changed, 231 insertions(+), 13 deletions(-)
>
> --
> 2.32.0
>
More information about the linux-arm-kernel
mailing list