[PATCH 2/2] ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U

[Arınç ÜNAL]

On 26/10/2021 11:29, Rafał Miłecki wrote:
> On 25.10.2021 23:39, Arınç ÜNAL wrote:
>> Define the Realtek RTL8365MB switch without interrupt support on the 
>> device tree of Asus RT-AC88U.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> 
> ./scripts/checkpatch.pl doesn't like formatting in your patch:
> 
> WARNING: Possible unwrapped commit description (prefer a maximum 75 
> chars per line)
> #9:
> Define the Realtek RTL8365MB switch without interrupt support on the 
> device tree of Asus RT-AC88U.
> 
> 
> This change introduces new "make ARCH=arm dtbs_check" validation
> warnings / errors:
> 
> arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dt.yaml:0:0: /switch: failed to 
> match any schema with compatible: ['realtek,rtl8365mb']
> arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dt.yaml:0:0: /switch/mdio: 
> failed to match any schema with compatible: ['realtek,smi-mdio']
> /home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dt.yaml: 
> phy at 0: '#phy-cells' is a required property
>          From schema: 
> /home/rmilecki/.local/lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml 
> 
> /home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dt.yaml: 
> phy at 1: '#phy-cells' is a required property
>          From schema: 
> /home/rmilecki/.local/lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml 
> 
> /home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dt.yaml: 
> phy at 2: '#phy-cells' is a required property
>          From schema: 
> /home/rmilecki/.local/lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml 
> 
> /home/rmilecki/linux/linux-next/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dt.yaml: 
> phy at 3: '#phy-cells' is a required property
>          From schema: 
> /home/rmilecki/.local/lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml 
> 
> 
> the first two are caused by realtek-smi.txt not being converted to YAML.
> Ignore them.
> 
> Later are caused by using phy@ instead of ethernet-phy@ and have to be
> fixed.

I'm going to address these in v2, thanks.