[PATCH] ARM: dts: vf610-zii-dev-rev-b: specify phy-mode for external PHYs

[Russell King (Oracle)]

Specify the phy-mode for the external PHYs on the third switch on the
ZII development rev B board so phylink and phylib knows what mode these
interfaces are configured for.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 9034d99cee97..65e54dcd46b2 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -211,12 +211,14 @@ port at 0 {
 						reg = <0>;
 						label = "lan6";
 						phy-handle = <&switch2phy0>;
+						phy-mode = "sgmii";
 					};
 
 					port at 1 {
 						reg = <1>;
 						label = "lan7";
 						phy-handle = <&switch2phy1>;
+						phy-mode = "sgmii";
 					};
 
 					port at 2 {
-- 
2.30.2