[PATCH 3/5] arm64: dts: apple: t8103: Add PCIe DARTs

[Marc Zyngier]

PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka
DARTs). Add the three instances that deal with the internal PCIe
ports and route each port's traffic through its DART.

Signed-off-by: Marc Zyngier <maz at kernel.org>
---
 arch/arm64/boot/dts/apple/t8103.dtsi | 30 ++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index ed562e1103a9..ded82a734d11 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -219,6 +219,30 @@ pinctrl_smc: pinctrl at 23e820000 {
 				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pcie0_dart_0: dart at 681008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x81008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 696 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie0_dart_1: dart at 682008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x82008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 699 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie0_dart_2: dart at 683008000 {
+			compatible = "apple,t8103-dart";
+			reg = <0x6 0x83008000 0x0 0x4000>;
+			#iommu-cells = <1>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 702 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pcie0: pcie at 690000000 {
 			compatible = "apple,t8103-pcie", "apple,pcie";
 			device_type = "pci";
@@ -239,6 +263,12 @@ pcie0: pcie at 690000000 {
 			msi-parent = <&pcie0>;
 			msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
 
+
+			iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				    <0x200 &pcie0_dart_1 1 1>,
+				    <0x300 &pcie0_dart_2 1 1>;
+			iommu-map-mask = <0xff00>;
+
 			bus-range = <0 3>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-- 
2.30.2