[PATCH 4/4] ARM: dts: imx7d: remarkable2: Enable the cyttsp5
Alistair Francis
alistair at alistair23.me
Mon Oct 25 04:42:14 PDT 2021
Signed-off-by: Alistair Francis <alistair at alistair23.me>
---
arch/arm/boot/dts/imx7d-remarkable2.dts | 88 +++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..9a8558c970ad 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,18 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_touch: regulator-touch {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_TOUCH";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_touch_reg>;
+ pinctrl-1 = <&pinctrl_touch_reg>;
+ gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -51,6 +63,59 @@ &clks {
assigned-clock-rates = <0>, <32768>;
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ tsc at 24 {
+ compatible = "cypress,cyttsp5";
+ reg = <0x24>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio1 13 0>;
+ vdd-supply = <®_touch>;
+ touchscreen-size-x = <880>;
+ touchscreen-size-y = <1280>;
+
+ button at 0 {
+ linux,code = <172>; /* KEY_HOMEPAGE */
+ };
+
+ button at 1 {
+ linux,code = <139>; /* KEY_MENU */
+ };
+
+ button at 2 {
+ linux,code = <158>; /* KEY_BACK */
+ };
+
+ button at 3 {
+ linux,code = <217>; /* KEY_SEARCH */
+ };
+
+ button at 4 {
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+
+ button at 5 {
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ button at 6 {
+ linux,code = <212>; /* KEY_CAMERA */
+ };
+
+ button at 7 {
+ linux,code = <116>; /* KEY_POWER */
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -125,6 +190,29 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ /* CYTTSP interrupt */
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x54
+ /* CYTTSP reset */
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x04
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_touch_reg: touchreggrp {
+ fsl,pins = <
+ /* TOUCH_PWR_EN */
+ MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x14
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
More information about the linux-arm-kernel
mailing list