[PATCH 2/4] arm64: dts: amlogic: meson-g12: Fix thermal-zones indent

[Alexander Stein]

This node is currently at /soc/thermal-zones, but the later introduced
bindings in commit 1202a442a31f ("dt-bindings: thermal: Add yaml bindings
for thermal zones") put this at /thermal-zones.
Fix dtb_check warning by moving the thermal-zones node to /

Fixes: e7251ed74ef7 ("arm64: dts: meson: g12: Add minimal thermal zone")
Signed-off-by: Alexander Stein <alexander.stein at mailbox.org>
---
I admit I'm a bit unsure about the 'Fixes' tag as at the time when those
thermal-zones were added there was no schema present. So there was no bug at
the time of writing. I'm ok either way.

 .../boot/dts/amlogic/meson-g12-common.dtsi    | 110 +++++++++---------
 1 file changed, 55 insertions(+), 55 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 00c6f53290d4..ff987e7ccff2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -159,61 +159,6 @@ &clkc CLKID_PCIE_COMB
 			status = "disabled";
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay = <1000>;
-				polling-delay-passive = <100>;
-				thermal-sensors = <&cpu_temp>;
-
-				trips {
-					cpu_passive: cpu-passive {
-						temperature = <85000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "passive";
-					};
-
-					cpu_hot: cpu-hot {
-						temperature = <95000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "hot";
-					};
-
-					cpu_critical: cpu-critical {
-						temperature = <110000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "critical";
-					};
-				};
-			};
-
-			ddr_thermal: ddr-thermal {
-				polling-delay = <1000>;
-				polling-delay-passive = <100>;
-				thermal-sensors = <&ddr_temp>;
-
-				trips {
-					ddr_passive: ddr-passive {
-						temperature = <85000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "passive";
-					};
-
-					ddr_critical: ddr-critical {
-						temperature = <110000>; /* millicelsius */
-						hysteresis = <2000>; /* millicelsius */
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map {
-						trip = <&ddr_passive>;
-						cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		ethmac: ethernet at ff3f0000 {
 			compatible = "amlogic,meson-g12a-dwmac",
 				     "snps,dwmac-3.70a",
@@ -2415,6 +2360,61 @@ mali: gpu at ffe40000 {
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&cpu_temp>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay = <1000>;
+			polling-delay-passive = <100>;
+			thermal-sensors = <&ddr_temp>;
+
+			trips {
+				ddr_passive: ddr-passive {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				ddr_critical: ddr-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&ddr_passive>;
+					cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-- 
2.33.1