[PATCH v5 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

[Jim Quinlan]

Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
allows optional regulators to be attached and controlled by the PCIe RC
driver.  That being said, this driver searches in the DT subnode (the EP
node, eg pci at 0,0) for the regulator property.

The use of a regulator property in the pcie EP subnode such as
"vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
file at

https://github.com/devicetree-org/dt-schema/pull/54

Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index b9589a0daa5c..fec13e4f6eda 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -154,5 +154,28 @@ examples:
                                  <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
                     brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge */
+                    pci at 0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            device_type = "pci";
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci at 0,0 {
+                                    device_type = "pci";
+                                    assigned-addresses = <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                                    vpcie3v3-supply = <&vreg7>;
+
+                                    #address-cells = <3>;
+                                    #size-cells = <2>;
+
+                                    ranges;
+                            };
+                    };
             };
     };
-- 
2.17.1