[PATCH v16 2/7] arm64: dts: mt8183: add svs device information

[AngeloGioacchino Del Regno]

Il 28/04/21 08:54, Roger Lu ha scritto:
> add compitable/reg/irq/clock/efuse setting in svs node
> 
> Signed-off-by: Roger Lu <roger.lu at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 80519a145f13..441d617ece43 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -657,6 +657,18 @@
>   			status = "disabled";
>   		};
>   
> +		svs: svs at 1100b000 {
> +			compatible = "mediatek,mt8183-svs";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&infracfg CLK_INFRA_THERM>;
> +			clock-names = "main";
> +			nvmem-cells = <&svs_calibration>,
> +				      <&thermal_calibration>;
> +			nvmem-cell-names = "svs-calibration-data",
> +					   "t-calibration-data";
> +		};
> +
>   		pwm0: pwm at 1100e000 {
>   			compatible = "mediatek,mt8183-disp-pwm";
>   			reg = <0 0x1100e000 0 0x1000>;
> @@ -941,9 +953,15 @@
>   			reg = <0 0x11f10000 0 0x1000>;
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> +			thermal_calibration: calib at 180 {
> +				reg = <0x180 0xc>;
> +			};
>   			mipi_tx_calibration: calib at 190 {
>   				reg = <0x190 0xc>;
>   			};
> +			svs_calibration: calib at 580 {
> +				reg = <0x580 0x64>;
> +			};
>   		};
>   
>   		u3phy: usb-phy at 11f40000 {
> 

This patch doesn't apply on the latest linux-next due to some new commits in
mt8183.dtsi, can you please rebase?

Thanks,
- Angelo