[PATCH v15 09/10] of: fdt: Add memory for devices by DT property "linux,usable-memory-range"

Rob Herring robh at kernel.org
Wed Oct 20 07:19:45 PDT 2021


On Wed, Oct 20, 2021 at 10:03:16AM +0800, Zhen Lei wrote:
> From: Chen Zhou <chenzhou10 at huawei.com>
> 
> When reserving crashkernel in high memory, some low memory is reserved
> for crash dump kernel devices and never mapped by the first kernel.
> This memory range is advertised to crash dump kernel via DT property
> under /chosen,
>         linux,usable-memory-range = <BASE1 SIZE1 [BASE2 SIZE2]>
> 
> We reused the DT property linux,usable-memory-range and made the low
> memory region as the second range "BASE2 SIZE2", which keeps compatibility
> with existing user-space and older kdump kernels.
> 
> Crash dump kernel reads this property at boot time and call memblock_add()
> to add the low memory region after memblock_cap_memory_range() has been
> called.
> 
> Signed-off-by: Chen Zhou <chenzhou10 at huawei.com>
> Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
> ---
>  drivers/of/fdt.c | 47 ++++++++++++++++++++++++++++++++++++-----------
>  1 file changed, 36 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
> index 4546572af24bbf1..cf59c847b2c28a5 100644
> --- a/drivers/of/fdt.c
> +++ b/drivers/of/fdt.c
> @@ -969,8 +969,16 @@ static void __init early_init_dt_check_for_elfcorehdr(unsigned long node)
>  		 elfcorehdr_addr, elfcorehdr_size);
>  }
>  
> -static phys_addr_t cap_mem_addr;
> -static phys_addr_t cap_mem_size;
> +/*
> + * The main usage of linux,usable-memory-range is for crash dump kernel.
> + * Originally, the number of usable-memory regions is one. Now there may
> + * be two regions, low region and high region.
> + * To make compatibility with existing user-space and older kdump, the low
> + * region is always the last range of linux,usable-memory-range if exist.
> + */
> +#define MAX_USABLE_RANGES		2
> +
> +static struct memblock_region cap_mem_regions[MAX_USABLE_RANGES];
>  
>  /**
>   * early_init_dt_check_for_usable_mem_range - Decode usable memory range
> @@ -979,20 +987,30 @@ static phys_addr_t cap_mem_size;
>   */
>  static void __init early_init_dt_check_for_usable_mem_range(unsigned long node)
>  {
> -	const __be32 *prop;
> -	int len;
> +	const __be32 *prop, *endp;
> +	int len, nr = 0;
> +	struct memblock_region *rgn = &cap_mem_regions[0];
>  
>  	pr_debug("Looking for usable-memory-range property... ");
>  
>  	prop = of_get_flat_dt_prop(node, "linux,usable-memory-range", &len);
> -	if (!prop || (len < (dt_root_addr_cells + dt_root_size_cells)))
> +	if (!prop)
>  		return;
>  
> -	cap_mem_addr = dt_mem_next_cell(dt_root_addr_cells, &prop);
> -	cap_mem_size = dt_mem_next_cell(dt_root_size_cells, &prop);
> +	endp = prop + (len / sizeof(__be32));
> +	while ((endp - prop) >= (dt_root_addr_cells + dt_root_size_cells)) {
> +		rgn->base = dt_mem_next_cell(dt_root_addr_cells, &prop);
> +		rgn->size = dt_mem_next_cell(dt_root_size_cells, &prop);
> +
> +		pr_debug("cap_mem_regions[%d]: base=%pa, size=%pa\n",
> +			 nr, &rgn->base, &rgn->size);
> +
> +		if (++nr >= MAX_USABLE_RANGES)
> +			break;
> +
> +		rgn++;
> +	}
>  
> -	pr_debug("cap_mem_start=%pa cap_mem_size=%pa\n", &cap_mem_addr,
> -		 &cap_mem_size);
>  }
>  
>  #ifdef CONFIG_SERIAL_EARLYCON
> @@ -1265,7 +1283,8 @@ bool __init early_init_dt_verify(void *params)
>  
>  void __init early_init_dt_scan_nodes(void)
>  {
> -	int rc = 0;
> +	int i, rc = 0;
> +	struct memblock_region *rgn = &cap_mem_regions[0];
>  
>  	/* Initialize {size,address}-cells info */
>  	of_scan_flat_dt(early_init_dt_scan_root, NULL);
> @@ -1279,7 +1298,13 @@ void __init early_init_dt_scan_nodes(void)
>  	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
>  
>  	/* Handle linux,usable-memory-range property */
> -	memblock_cap_memory_range(cap_mem_addr, cap_mem_size);
> +	memblock_cap_memory_range(rgn->base, rgn->size);
> +	for (i = 1; i < MAX_USABLE_RANGES; i++) {
> +		rgn++;

Just use rgn[i].

> +
> +		if (rgn->size)

This check can be in the 'for' conditions check.

> +			memblock_add(rgn->base, rgn->size);
> +	}


There's not really any point in doing all this in 2 steps. I'm 
assuming this needs to be handled after scanning the memory nodes, so 
can you refactor this moving early_init_dt_check_for_usable_mem_range 
out of early_init_dt_scan_chosen() and call it here. You'll have to get 
the offset for /chosen twice or save the offset.

Rob



More information about the linux-arm-kernel mailing list