[PATCH 3/3] ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce

[Claudiu Beznea]

Use blocks 0 and 1 of TCB0 for clocksource and clockevent functionality.
PIT64B is already enabled on SAMA7G5 targets for this but TCB0 will be
used as a fallback only in case PIT64B will fail to probe.

Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 arch/arm/boot/dts/at91-sama7g5ek.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 0f53b2db28a2..0e1975c6812e 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -687,6 +687,18 @@ &spdiftx {
 	status = "okay";
 };
 
+&tcb0 {
+	timer0: timer at 0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer at 1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
 &trng {
 	status = "okay";
 };
-- 
2.25.1