[PATCH v5 11/14] irqchip/irq-bcm7120-l2: Switch to IRQCHIP_PLATFORM_DRIVER

[Florian Fainelli]

Allow the user selection and building of this interrupt controller
driver as a module since it is used on ARM/ARM64 based systems as a
second level interrupt controller hanging off the ARM GIC and is
therefore loadable during boot.

To avoid using of_irq_count() which is not exported towards module,
switch the driver to use the platform_device provided by the irqchip
platform driver code and resolve the number of interrupts using
platform_irq_count().

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/irqchip/Kconfig          |  4 +++-
 drivers/irqchip/irq-bcm7120-l2.c | 28 ++++++++++++++++------------
 2 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index dfe54bf9b35f..c7320bed5668 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -123,7 +123,9 @@ config BCM7038_L1_IRQ
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK
 
 config BCM7120_L2_IRQ
-	bool
+	tristate "Broadcom STB 7120-style L2 interrupt controller driver"
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC
+	default ARCH_BRCMSTB || BMIPS_GENERIC
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
diff --git a/drivers/irqchip/irq-bcm7120-l2.c b/drivers/irqchip/irq-bcm7120-l2.c
index f23d7651ea84..9b1edf7747fd 100644
--- a/drivers/irqchip/irq-bcm7120-l2.c
+++ b/drivers/irqchip/irq-bcm7120-l2.c
@@ -214,6 +214,7 @@ static int __init bcm7120_l2_intc_iomap_3380(struct device_node *dn,
 
 static int __init bcm7120_l2_intc_probe(struct device_node *dn,
 				 struct device_node *parent,
+				 struct platform_device *pdev,
 				 int (*iomap_regs_fn)(struct device_node *,
 					struct bcm7120_l2_intc_data *),
 				 const char *intc_name)
@@ -230,7 +231,7 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
 	if (!data)
 		return -ENOMEM;
 
-	data->num_parent_irqs = of_irq_count(dn);
+	data->num_parent_irqs = platform_irq_count(pdev);
 	if (data->num_parent_irqs <= 0) {
 		pr_err("invalid number of parent interrupts\n");
 		ret = -ENOMEM;
@@ -334,21 +335,24 @@ static int __init bcm7120_l2_intc_probe(struct device_node *dn,
 }
 
 static int __init bcm7120_l2_intc_probe_7120(struct device_node *dn,
-					     struct device_node *parent)
+					     struct device_node *parent,
+					     struct platform_device *pdev)
 {
-	return bcm7120_l2_intc_probe(dn, parent, bcm7120_l2_intc_iomap_7120,
-				     "BCM7120 L2");
+	return bcm7120_l2_intc_probe(dn, parent, pdev,
+				     bcm7120_l2_intc_iomap_7120, "BCM7120 L2");
 }
 
 static int __init bcm7120_l2_intc_probe_3380(struct device_node *dn,
-					     struct device_node *parent)
+					     struct device_node *parent,
+					     struct platform_device *pdev)
 {
-	return bcm7120_l2_intc_probe(dn, parent, bcm7120_l2_intc_iomap_3380,
-				     "BCM3380 L2");
+	return bcm7120_l2_intc_probe(dn, parent, pdev,
+				     bcm7120_l2_intc_iomap_3380, "BCM3380 L2");
 }
 
-IRQCHIP_DECLARE(bcm7120_l2_intc, "brcm,bcm7120-l2-intc",
-		bcm7120_l2_intc_probe_7120);
-
-IRQCHIP_DECLARE(bcm3380_l2_intc, "brcm,bcm3380-l2-intc",
-		bcm7120_l2_intc_probe_3380);
+IRQCHIP_PLATFORM_DRIVER_BEGIN(bcm7120_l2)
+IRQCHIP_MATCH("brcm,bcm7120-l2-intc", bcm7120_l2_intc_probe_7120)
+IRQCHIP_MATCH("brcm,bcm3380-l2-intc", bcm7120_l2_intc_probe_3380)
+IRQCHIP_PLATFORM_DRIVER_END(bcm7120_l2)
+MODULE_DESCRIPTION("Broadcom STB 7120-style L2 interrupt controller driver");
+MODULE_LICENSE("GPL v2");
-- 
2.25.1