[PATCH v2 4/4] thermal: mediatek: add MT8365 thermal driver support
Markus Schneider-Pargmann
msp at baylibre.com
Tue Oct 19 02:34:04 PDT 2021
From: Fabien Parent <fparent at baylibre.com>
mt8365 is similar to the other SoCs supported by the driver. It has only
one bank and 3 sensors that can be multiplexed.
Additionally the buffer has to be enabled and connected to AUXADC
similar to the V2 version but at a different register offset. That's why
I added three new configuration values to define the register, mask and
bits to be set to be able to use it for both V2 and mt8365.
Signed-off-by: Fabien Parent <fparent at baylibre.com>
[Added apmixed control register logic]
Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
---
Notes:
Changes v1 -> v2:
- Use of ARRAY_SIZE to avoid NUM macros.
- Remove (void*) cast.
- Use macros for mt7622 buffer_ctl operations.
drivers/thermal/mtk_thermal.c | 90 ++++++++++++++++++++++++++++++++---
1 file changed, 84 insertions(+), 6 deletions(-)
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index af6cd11eb221..fc4ea58d00ec 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -31,6 +31,7 @@
#define AUXADC_CON2_V 0x010
#define AUXADC_DATA(channel) (0x14 + (channel) * 4)
+#define APMIXED_SYS_TS_CON0 0x600
#define APMIXED_SYS_TS_CON1 0x604
/* Thermal Controller Registers */
@@ -212,6 +213,8 @@ enum mtk_thermal_version {
#define MT7622_NUM_SENSORS_PER_ZONE 1
#define MT7622_TS1 0
#define MT7622_NUM_CONTROLLER 1
+#define MT7622_BUFFER_CTL_MASK ~0x37
+#define MT7622_BUFFER_CTL_SET 0x1
/* The maximum number of banks */
#define MAX_NUM_ZONES 8
@@ -245,6 +248,14 @@ enum mtk_thermal_version {
/* The calibration coefficient of sensor */
#define MT8183_CALIBRATION 153
+/* MT8365 */
+#define MT8365_TEMP_AUXADC_CHANNEL 11
+#define MT8365_CALIBRATION 164
+#define MT8365_NUM_BANKS 1
+#define MT8365_TS1 0
+#define MT8365_TS2 1
+#define MT8365_TS3 2
+
struct mtk_thermal;
struct thermal_bank_cfg {
@@ -271,6 +282,9 @@ struct mtk_thermal_data {
bool need_switch_bank;
struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
enum mtk_thermal_version version;
+ u32 apmixed_buffer_ctl_reg;
+ u32 apmixed_buffer_ctl_mask;
+ u32 apmixed_buffer_ctl_set;
};
struct mtk_thermal {
@@ -386,6 +400,25 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
+/* MT8365 thermal sensor data */
+static const int mt8365_bank_data[] = {
+ MT8365_TS1, MT8365_TS2, MT8365_TS3
+};
+
+static const int mt8365_msr[ARRAY_SIZE(mt8365_bank_data)] = {
+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
+};
+
+static const int mt8365_adcpnp[ARRAY_SIZE(mt8365_bank_data)] = {
+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
+};
+
+static const int mt8365_mux_values[ARRAY_SIZE(mt8365_bank_data)] = { 0, 1, 2 };
+static const int mt8365_tc_offset[] = { 0 };
+
+static const int mt8365_vts_index[ARRAY_SIZE(mt8365_bank_data)] = { VTS1, VTS2,
+ VTS3 };
+
/*
* The MT8173 thermal controller has four banks. Each bank can read up to
* four temperature sensors simultaneously. The MT8173 has a total of 5
@@ -460,6 +493,39 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
.version = MTK_THERMAL_V1,
};
+/*
+ * The MT8365 thermal controller has one bank, which can read up to
+ * four temperature sensors simultaneously. The MT8365 has a total of 3
+ * temperature sensors.
+ *
+ * The thermal core only gets the maximum temperature of this one bank,
+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
+ * Voltage Scaling) unit makes its decisions based on the same bank
+ * data.
+ */
+static const struct mtk_thermal_data mt8365_thermal_data = {
+ .auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL,
+ .num_banks = MT8365_NUM_BANKS,
+ .num_sensors = ARRAY_SIZE(mt8365_bank_data),
+ .vts_index = mt8365_vts_index,
+ .cali_val = MT8365_CALIBRATION,
+ .num_controller = ARRAY_SIZE(mt8365_tc_offset),
+ .controller_offset = mt8365_tc_offset,
+ .need_switch_bank = false,
+ .bank_data = {
+ {
+ .num_sensors = ARRAY_SIZE(mt8365_bank_data),
+ .sensors = mt8365_bank_data
+ },
+ },
+ .msr = mt8365_msr,
+ .adcpnp = mt8365_adcpnp,
+ .sensor_mux_values = mt8365_mux_values,
+ .version = MTK_THERMAL_V1,
+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0,
+ .apmixed_buffer_ctl_mask = ~(u32)GENMASK(29, 28),
+};
+
/*
* The MT2712 thermal controller has one bank, which can read up to
* four temperature sensors simultaneously. The MT2712 has a total of 4
@@ -514,6 +580,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
.adcpnp = mt7622_adcpnp,
.sensor_mux_values = mt7622_mux_values,
.version = MTK_THERMAL_V2,
+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
+ .apmixed_buffer_ctl_mask = MT7622_BUFFER_CTL_MASK,
+ .apmixed_buffer_ctl_set = MT7622_BUFFER_CTL_SET,
};
/*
@@ -958,19 +1027,27 @@ static const struct of_device_id mtk_thermal_of_match[] = {
{
.compatible = "mediatek,mt8183-thermal",
.data = &mt8183_thermal_data,
+ },
+ {
+ .compatible = "mediatek,mt8365-thermal",
+ .data = &mt8365_thermal_data,
}, {
},
};
MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
-static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
+ void __iomem *apmixed_base)
{
int tmp;
- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
- tmp &= ~(0x37);
- tmp |= 0x1;
- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
+ if (!mt->conf->apmixed_buffer_ctl_reg)
+ return;
+
+ tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
+ tmp &= mt->conf->apmixed_buffer_ctl_mask;
+ tmp |= mt->conf->apmixed_buffer_ctl_set;
+ writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
udelay(200);
}
@@ -1070,8 +1147,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_auxadc;
}
+ mtk_thermal_turn_on_buffer(mt, apmixed_base);
+
if (mt->conf->version == MTK_THERMAL_V2) {
- mtk_thermal_turn_on_buffer(apmixed_base);
mtk_thermal_release_periodic_ts(mt, auxadc_base);
}
--
2.33.0
More information about the linux-arm-kernel
mailing list