[PATCH v8 4/7] soc: mediatek: mutex: add functions that operate registers by CMDQ
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Mon Oct 18 06:50:17 PDT 2021
> Considering that some functions have timing requirements
> in specific situation, this patch adds several interface that
> operate registers by CMDQ.
>
> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> ---
> drivers/soc/mediatek/mtk-mutex.c | 63 +++++++++++++++++++++++++-
> include/linux/soc/mediatek/mtk-mutex.h | 6 +++
> 2 files changed, 68 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
> index adab4c9edc16..874d4c60b844 100644
> --- a/drivers/soc/mediatek/mtk-mutex.c
> +++ b/drivers/soc/mediatek/mtk-mutex.c
> @@ -7,10 +7,12 @@
> #include <linux/iopoll.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/of_address.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/soc/mediatek/mtk-mmsys.h>
> #include <linux/soc/mediatek/mtk-mutex.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
>
> #define MT2701_MUTEX0_MOD0 0x2c
> #define MT2701_MUTEX0_SOF0 0x30
> @@ -143,6 +145,8 @@ struct mtk_mutex_ctx {
> void __iomem *regs;
> struct mtk_mutex mutex[10];
> const struct mtk_mutex_data *data;
> + phys_addr_t addr;
> + u8 subsys_id;
> };
>
> static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = {
> @@ -442,6 +446,25 @@ void mtk_mutex_remove_comp(struct mtk_mutex *mutex,
> }
> EXPORT_SYMBOL_GPL(mtk_mutex_remove_comp);
>
> +void mtk_mutex_add_mod_by_cmdq(struct mtk_mutex *mutex, u32 mod,
> + struct mmsys_cmdq_cmd *cmd)
> +{
> + struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
> + mutex[mutex->id]);
> + unsigned int offset;
> +
> + WARN_ON(&mtx->mutex[mutex->id] != mutex);
> +
> + offset = DISP_REG_MUTEX_MOD(mtx->data->mutex_mod_reg, mutex->id);
> + cmdq_pkt_write_mask(cmd->pkt, mtx->subsys_id, mtx->addr + offset,
> + mod, mtx->data->mutex_mdp_mod_mask);
> +
> + offset = DISP_REG_MUTEX_SOF(mtx->data->mutex_sof_reg, mutex->id);
> + cmdq_pkt_write_mask(cmd->pkt, mtx->subsys_id, mtx->addr + offset,
> + 0, mtx->data->mutex_mdp_sof_mask);
> +}
> +EXPORT_SYMBOL_GPL(mtk_mutex_add_mod_by_cmdq);
> +
> void mtk_mutex_enable(struct mtk_mutex *mutex)
> {
> struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
> @@ -453,6 +476,20 @@ void mtk_mutex_enable(struct mtk_mutex *mutex)
> }
> EXPORT_SYMBOL_GPL(mtk_mutex_enable);
>
> +void mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex,
> + struct mmsys_cmdq_cmd *cmd)
> +{
> + struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
> + mutex[mutex->id]);
> +
> + WARN_ON(&mtx->mutex[mutex->id] != mutex);
> +
> + cmdq_pkt_write_mask(cmd->pkt, mtx->subsys_id,
> + mtx->addr + DISP_REG_MUTEX_EN(mutex->id),
> + 0x1, 0x00000001);
(don't use this definition name if not appropriate)
#define MTK_MUTEX_ENABLE BIT(0)
cmdq_pkt_write_mask(cmd->pkt, mtx->subsys_id,
mtx->addr + DISP_REG_MUTEX_EN(mutex->id),
MTK_MUTEX_ENABLE, MTK_MUTEX_ENABLE);
...or anyway remove leading zeros.
> +}
> +EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq);
> +
> void mtk_mutex_disable(struct mtk_mutex *mutex)
> {
> struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
> @@ -464,6 +501,20 @@ void mtk_mutex_disable(struct mtk_mutex *mutex)
> }
> EXPORT_SYMBOL_GPL(mtk_mutex_disable);
>
> +void mtk_mutex_disable_by_cmdq(struct mtk_mutex *mutex,
> + struct mmsys_cmdq_cmd *cmd)
> +{
> + struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
> + mutex[mutex->id]);
> +
> + WARN_ON(&mtx->mutex[mutex->id] != mutex);
> +
> + cmdq_pkt_write_mask(cmd->pkt, mtx->subsys_id,
> + mtx->addr + DISP_REG_MUTEX_EN(mutex->id),
> + 0x0, 0x00000001);
cmdq_pkt_write_mask(cmd->pkt, mtx->subsys_id,
mtx->addr + DISP_REG_MUTEX_EN(mutex->id),
0, MTK_MUTEX_ENABLE);
> +}
> +EXPORT_SYMBOL_GPL(mtk_mutex_disable_by_cmdq);
> +
Regards,
- Angelo
More information about the linux-arm-kernel
mailing list