[PATCH 2/2] dt-bindings: soc: bcm: Convert brcm, bcm2835-vchiq to json-schema

[Rob Herring]

On Sun, Oct 17, 2021 at 11:31 AM Stefan Wahren <stefan.wahren at i2se.com> wrote:
>
> Hi Rob,
>
> Am 17.10.21 um 17:29 schrieb Rob Herring:
> > On Sun, 17 Oct 2021 15:06:36 +0200, Stefan Wahren wrote:
> >> This converts the VCHIQ bindings to YAML format.
> >>
> >> Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
> >> ---
> >>  .../bindings/soc/bcm/brcm,bcm2835-vchiq.txt        | 17 --------
> >>  .../bindings/soc/bcm/brcm,bcm2835-vchiq.yaml       | 47 ++++++++++++++++++++++
> >>  2 files changed, 47 insertions(+), 17 deletions(-)
> >>  delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.txt
> >>  create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml
> >>
> > Running 'make dtbs_check' with the schema in this patch gives the
> > following warnings. Consider if they are expected or the schema is
> > incorrect. These may not be new warnings.
> >
> > Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> > This will change in the future.
> >
> > Full log is available here: https://patchwork.ozlabs.org/patch/1542230
> >
> >
> > mailbox at 7e00b840: compatible: Additional items are not allowed ('brcm,bcm2835-vchiq' was unexpected)
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dt.yaml
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dt.yaml
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dt.yaml
> >       arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dt.yaml
> >
> > mailbox at 7e00b840: compatible: ['brcm,bcm2836-vchiq', 'brcm,bcm2835-vchiq'] is too long
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dt.yaml
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dt.yaml
> >       arch/arm64/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dt.yaml
> >       arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dt.yaml
> >       arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dt.yaml
>
> i'm confused patch 1/2 ( "ARM: dts: bcm283x: Drop fallback compatible
> for vchiq" ) of this series should prevent this warning. Was it applied
> before running dtbs_check?

No, so you can ignore this.

Rob