[PATCH 5/8] phy: uniphier-pcie: Set VCOPLL clamp mode in PHY register

[Kunihiko Hayashi]

Set VCOPLL clamp mode to mode 0 to avoid hardware unstable issue.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
 drivers/phy/socionext/phy-uniphier-pcie.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index fde8aac5f4b6..2bd8df619712 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -51,6 +51,9 @@
 #define PCL_PHY_R26		26
 #define   VCO_CTRL		GENMASK(7, 4)	/* Tx VCO adjustment value */
 #define   VCO_CTRL_INIT_VAL	5
+#define PCL_PHY_R28		28
+#define   VCOPLL_CLMP		GENMASK(3, 2)	/* Tx VCOPLL clamp mode */
+#define   VCOPLL_CLMP_VAL	0
 
 struct uniphier_pciephy_priv {
 	void __iomem *base;
@@ -158,6 +161,8 @@ static int uniphier_pciephy_init(struct phy *phy)
 				   FIELD_PREP(RX_EQ_ADJ, RX_EQ_ADJ_VAL));
 	uniphier_pciephy_set_param(priv, PCL_PHY_R26, VCO_CTRL,
 				   FIELD_PREP(VCO_CTRL, VCO_CTRL_INIT_VAL));
+	uniphier_pciephy_set_param(priv, PCL_PHY_R28, VCOPLL_CLMP,
+				   FIELD_PREP(VCOPLL_CLMP, VCOPLL_CLMP_VAL));
 	usleep_range(1, 10);
 
 	uniphier_pciephy_deassert(priv);
-- 
2.7.4