[PATCH v2 0/6] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards

[Shawn Guo]

On Fri, Oct 15, 2021 at 02:48:34PM +0200, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf at kontron.de>
> 
> This is a set of enhancements and fixes for the devicetrees of the Kontron
> SL/BL i.MX8MM SoMs and boards.
> 
> See the individual patches for more information and changelogs.
> 
> For v2, the review comments from Shawn ahve been taken into account
> (thanks!) and the patches 7 and 8 have been dropped, as they were already
> applied separately.
> 
> Frieder Schrempf (6):
>   arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on
>     SD card
>   arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are
>     correct
>   arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
>   arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
>   arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
>   arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY

Applied all, thanks!