[RESEND v2 3/5] PCI: imx6: Fix the regulator dump when link never came up

[Lucas Stach]

Am Freitag, dem 15.10.2021 um 14:05 +0800 schrieb Richard Zhu:
> When PCIe PHY link never came up and vpcie regulator is present, there
> would be following dump when try to put the regulator.
> Disable this regulator to fix this dump when link never came up.
> 
>   imx6q-pcie 33800000.pcie: Phy link never came up
>   imx6q-pcie: probe of 33800000.pcie failed with error -110
>   ------------[ cut here ]------------
>   WARNING: CPU: 3 PID: 119 at drivers/regulator/core.c:2256 _regulator_put.part.0+0x14c/0x158
>   Modules linked in:
>   CPU: 3 PID: 119 Comm: kworker/u8:2 Not tainted 5.13.0-rc7-next-20210625-94710-ge4e92b2588a3 #10
>   Hardware name: FSL i.MX8MM EVK board (DT)
>   Workqueue: events_unbound async_run_entry_fn
>   pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
>   pc : _regulator_put.part.0+0x14c/0x158
>   lr : regulator_put+0x34/0x48
>   sp : ffff8000122ebb30
>   x29: ffff8000122ebb30 x28: ffff800011be7000 x27: 0000000000000000
>   x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000025f2bc
>   x23: ffff00000025f2c0 x22: ffff00000025f010 x21: ffff8000122ebc18
>   x20: ffff800011e3fa60 x19: ffff00000375fd80 x18: 0000000000000010
>   x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000108
>   x14: ffff0000003cc938 x13: 00000000ffffffea x12: 0000000000000000
>   x11: 0000000000000000 x10: ffff80001076ba88 x9 : ffff80001076a540
>   x8 : ffff00000025f2c0 x7 : ffff0000001f4450 x6 : ffff000000176cd8
>   x5 : ffff000003857880 x4 : 0000000000000000 x3 : ffff800011e3fe30
>   x2 : ffff0000003cc4c0 x1 : 0000000000000000 x0 : 0000000000000001
>   Call trace:
>    _regulator_put.part.0+0x14c/0x158
>    regulator_put+0x34/0x48
>    devm_regulator_release+0x10/0x18
>    release_nodes+0x38/0x60
>    devres_release_all+0x88/0xd0
>    really_probe+0xd0/0x2e8
>    __driver_probe_device+0x74/0xd8
>    driver_probe_device+0x7c/0x108
>    __device_attach_driver+0x8c/0xd0
>    bus_for_each_drv+0x74/0xc0
>    __device_attach_async_helper+0xb4/0xd8
>    async_run_entry_fn+0x30/0x100
>    process_one_work+0x19c/0x320
>    worker_thread+0x48/0x418
>    kthread+0x14c/0x158
>    ret_from_fork+0x10/0x18
>   ---[ end trace 3664ca4a50ce849b ]---
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 3372775834a2..cc837f8bf6d4 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -853,6 +853,8 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
>  		dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
>  	imx6_pcie_reset_phy(imx6_pcie);
> +	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> +		regulator_disable(imx6_pcie->vpcie);

This doesn't seem like the right place to add this. I guess it would be
better to have proper error handling after dw_pcie_host_init to roll
back things like the clock and regulator enable.

Regards,
Lucas

>  	return ret;
>  }
>