[PATCH v2 0/6] Devicetree fixes and additions for Kontron SL/BL i.MX8MM boards

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

This is a set of enhancements and fixes for the devicetrees of the Kontron
SL/BL i.MX8MM SoMs and boards.

See the individual patches for more information and changelogs.

For v2, the review comments from Shawn ahve been taken into account
(thanks!) and the patches 7 and 8 have been dropped, as they were already
applied separately.

Frieder Schrempf (6):
  arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on
    SD card
  arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are
    correct
  arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV
  arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
  arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
  arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY

 .../dts/freescale/imx8mm-kontron-n801x-s.dts  | 36 ++++++++++++++++---
 .../freescale/imx8mm-kontron-n801x-som.dtsi   | 10 ++++--
 2 files changed, 39 insertions(+), 7 deletions(-)

-- 
2.33.0