[PATCH] dt-bindings: gpio: zynq: Add missing compatible strings

[Michal Simek]

Hi Rob,

On 10/14/21 16:31, Rob Herring wrote:
> On Thu, 14 Oct 2021 12:14:18 +0200, Michal Simek wrote:
>> "xlnx,zynqmp-gpio-1.0", "xlnx,versal-gpio-1.0" and "xlnx,pmc-gpio-1.0"
>> compatible strings were not moved to yaml format. But they were in origin
>> text file.
>>
>> Fixes: 45ca16072b70 ("dt-bindings: gpio: zynq: convert bindings to YAML")
>> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
>> ---
>>
>>   Documentation/devicetree/bindings/gpio/gpio-zynq.yaml | 6 +++++-
>>   1 file changed, 5 insertions(+), 1 deletion(-)
>>
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1540859
> 
> 
> gpio at ff0a0000: '#address-cells', 'gpio-line-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dt.yaml
> 
> gpio at ff0a0000: '#address-cells', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dt.yaml
> 	arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dt.yaml
> 

I sent patches for listing power-domain and gpio-line-names based on 
this patch.

Thanks,
Michal