(subset) [PATCH 3/5] drm/vc4: hdmi: Set a default HSM rate

[Maxime Ripard]

On Wed, 22 Sep 2021 14:54:17 +0200, Maxime Ripard wrote:
> When the firmware doesn't setup the HSM rate (such as when booting
> without an HDMI cable plugged in), its rate is 0 and thus any register
> access results in a CPU stall, even though HSM is enabled.
> 
> Let's enforce a minimum rate at boot to avoid this issue.
> 
> 
> [...]

Applied to drm/drm-misc (drm-misc-fixes).

Thanks!
Maxime