[PATCH v3 09/17] ARM: dts: ls1021a: disable ifc node by default

[Li Yang]

Disable the bus in the SoC dtsi file to be enabled only in board dts
files. Also breakup long values in the ifc node to fix dtbs_check.

Signed-off-by: Li Yang <leoyang.li at nxp.com>
---
 arch/arm/boot/dts/ls1021a-qds.dts | 6 +++---
 arch/arm/boot/dts/ls1021a.dtsi    | 1 +
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 8982ba2c14c2..6db6604e7a18 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -189,9 +189,9 @@ &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	/* NOR, NAND Flashes and FPGA on board */
-	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
-		  0x2 0x0 0x0 0x7e800000 0x00010000
-		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
+		 <0x2 0x0 0x0 0x7e800000 0x00010000>,
+		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
 	nor at 0,0 {
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4a7d06a14946..e6677721263b 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -126,6 +126,7 @@ ifc: ifc at 1530000 {
 			compatible = "fsl,ifc", "simple-bus";
 			reg = <0x0 0x1530000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
 		};
 
 		dcfg: dcfg at 1ee0000 {
-- 
2.25.1