[PATCH v3 4/5] dt-bindings: clock: Document Exynos850 CMU bindings

[Sam Protsenko]

On Sat, 9 Oct 2021 at 23:41, Sylwester Nawrocki <snawrocki at kernel.org> wrote:
>
> On 08.10.2021 17:43, Sam Protsenko wrote:
> > Provide dt-schema documentation for Exynos850 SoC clock controller.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> > Acked-by: Chanwoo Choi <cw00.choi at samsung.com>
>
> > diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> > new file mode 100644
> > index 000000000000..79202e6e6402
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
> > @@ -0,0 +1,185 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Samsung Exynos850 SoC clock controller
> > +
> > +maintainers:
> > +  - Sam Protsenko <semen.protsenko at linaro.org>
> > +  - Chanwoo Choi <cw00.choi at samsung.com>
> > +  - Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> > +  - Sylwester Nawrocki <s.nawrocki at samsung.com>
> > +  - Tomasz Figa <tomasz.figa at gmail.com>
> > +
> > +description: |
> > +  Exynos850 clock controller is comprised of several CMU units, generating
> > +  clocks for different domains. Those CMU units are modeled as separate device
> > +  tree nodes, and might depend on each other. Root clocks in that clock tree are
> > +  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
> > +  clocks must be defined as fixed-rate clocks in dts.
> > +
> > +  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
> > +  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
> > +
> > +  Each clock is assigned an identifier and client nodes can use this identifier
> > +  to specify the clock which they consume. All clocks that available for usage
>
> s/All clocks that available/All clocks available ?
> No need to resend, I can amend it when applying.
>

Yeah, not a native speaker, I tend to do such mistakes sometimes :)
Please fix when applying.

Btw, I can see that you already applied 3 out of 5 patches from this
patch series here: [1]. Can you please also apply the rest, or is
there any outstanding comments that I missed?

[1] https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git/log/?h=for-v5.16/next