[PATCH v2 00/11] Add Apple M1 support to PASemi i2c driver

[Wolfram Sang]

On Fri, Oct 08, 2021 at 06:35:21PM +0200, Sven Peter wrote:
> Hi,
> 
> v1: https://lore.kernel.org/linux-i2c/20210926095847.38261-1-sven@svenpeter.dev/
> 
> Changes for v2:
>  - Added reviewed-by/acks
>  - Switched from ioport_map to pci_iomap as suggested by Arnd Bergmann
>  - Renamed i2c-pasemi-apple.c to i2c-pasemi-platform.c as suggested by
>    Wolfram Sang
>  - Replaced the ioport number in the adapter name with dev_name to be
>    able to identify separate busses in e.g. i2cdetect.
> 
> I still don't have access to any old PASemi hardware but the changes from
> v1 are pretty small and I expect them to still work. Would still be nice
> if someone with access to such hardware could give this a quick test.
> 
> 
> And for those who didn't see v1 the (almost) unchanged original cover letter:
> 
> This series adds support for the I2C controller found on Apple Silicon Macs
> which has quite a bit of history:
> 
> Apple bought P.A. Semi in 2008 and it looks like a part of its legacy continues
> to live on in the M1. This controller has actually been used since at least the
> iPhone 4S and hasn't changed much since then.
> Essentially, there are only a few differences that matter:
> 
> 	- The controller no longer is a PCI device
> 	- Starting at some iPhone an additional bit in one register
>           must be set in order to start transmissions.
> 	- The reference clock and hence the clock dividers are different
> 
> In order to add support for a platform device I first replaced PCI-specific
> bits and split out the PCI driver to its own file. Then I added support
> to make the clock divider configurable and converted the driver to use
> managed device resources to make it a bit simpler.
> 
> The Apple and PASemi driver will never be compiled in the same kernel
> since the Apple one will run on arm64 while the original PASemi driver
> will only be useful on powerpc.
> I've thus followed the octeon (mips)/thunderx(arm64) approach to do the
> split: I created a -core.c file which contains the shared logic and just
> compile that one for both the PASemi and the new Apple driver.
> 
> 
> Best,
> 
> Sven
> 
> Sven Peter (11):
>   dt-bindings: i2c: Add Apple I2C controller bindings
>   i2c: pasemi: Use io{read,write}32
>   i2c: pasemi: Use dev_name instead of port number
>   i2c: pasemi: Remove usage of pci_dev
>   i2c: pasemi: Split off common probing code
>   i2c: pasemi: Split pci driver to its own file
>   i2c: pasemi: Move common reset code to own function
>   i2c: pasemi: Allow to configure bus frequency
>   i2c: pasemi: Refactor _probe to use devm_*
>   i2c: pasemi: Add Apple platform driver
>   i2c: pasemi: Set enable bit for Apple variant
> 
>  .../devicetree/bindings/i2c/apple,i2c.yaml    |  61 +++++++++
>  MAINTAINERS                                   |   2 +
>  drivers/i2c/busses/Kconfig                    |  11 ++
>  drivers/i2c/busses/Makefile                   |   3 +

Applied to for-next with MAINTAINER bits dropped and added tags from
Olof and Christian, thanks!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20211011/71cc0ede/attachment-0001.sig>