[PATCH v7 6/8] cpuidle: Add RISC-V SBI CPU idle driver
Anup Patel
anup at brainfault.org
Mon Oct 11 01:22:32 PDT 2021
On Wed, Jun 16, 2021 at 11:16 PM Rafael J. Wysocki <rafael at kernel.org> wrote:
>
> On Thu, Jun 10, 2021 at 7:23 AM Anup Patel <anup.patel at wdc.com> wrote:
> >
> > The RISC-V SBI HSM extension provides HSM suspend call which can
> > be used by Linux RISC-V to enter platform specific low-power state.
> >
> > This patch adds a CPU idle driver based on RISC-V SBI calls which
> > will populate idle states from device tree and use SBI calls to
> > entry these idle states.
> >
> > Signed-off-by: Anup Patel <anup.patel at wdc.com>
> > ---
> > MAINTAINERS | 7 +
> > drivers/cpuidle/Kconfig | 5 +
> > drivers/cpuidle/Kconfig.riscv | 15 +
> > drivers/cpuidle/Makefile | 4 +
> > drivers/cpuidle/cpuidle-sbi.c | 626 ++++++++++++++++++++++++++++++++++
>
> Maybe call this cpuidle-riscv-sbi.c to avoid possible confusion.
Based on your suggestion, I have renamed cpuidle-riscv.c to
cpuidle-riscv-sbi.c in v8 series.
Regards,
Anup
>
> > 5 files changed, 657 insertions(+)
> > create mode 100644 drivers/cpuidle/Kconfig.riscv
> > create mode 100644 drivers/cpuidle/cpuidle-sbi.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 5108b5058502..a16b14c687b5 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -4796,6 +4796,13 @@ S: Supported
> > F: drivers/cpuidle/dt_idle_genpd.c
> > F: drivers/cpuidle/dt_idle_genpd.h
> >
> > +CPUIDLE DRIVER - RISC-V SBI
> > +M: Anup Patel <anup.patel at wdc.com>
> > +L: linux-pm at vger.kernel.org
> > +L: linux-riscv at lists.infradead.org
> > +S: Supported
> > +F: drivers/cpuidle/cpuidle-sbi.c
> > +
> > CRAMFS FILESYSTEM
> > M: Nicolas Pitre <nico at fluxnic.net>
> > S: Maintained
> > diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
> > index f1afe7ab6b54..ff71dd662880 100644
> > --- a/drivers/cpuidle/Kconfig
> > +++ b/drivers/cpuidle/Kconfig
> > @@ -66,6 +66,11 @@ depends on PPC
> > source "drivers/cpuidle/Kconfig.powerpc"
> > endmenu
> >
> > +menu "RISC-V CPU Idle Drivers"
> > +depends on RISCV
> > +source "drivers/cpuidle/Kconfig.riscv"
> > +endmenu
> > +
> > config HALTPOLL_CPUIDLE
> > tristate "Halt poll cpuidle driver"
> > depends on X86 && KVM_GUEST
> > diff --git a/drivers/cpuidle/Kconfig.riscv b/drivers/cpuidle/Kconfig.riscv
> > new file mode 100644
> > index 000000000000..78518c26af74
> > --- /dev/null
> > +++ b/drivers/cpuidle/Kconfig.riscv
> > @@ -0,0 +1,15 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +#
> > +# RISC-V CPU Idle drivers
> > +#
> > +
> > +config RISCV_SBI_CPUIDLE
> > + bool "RISC-V SBI CPU idle Driver"
> > + depends on RISCV_SBI
> > + select DT_IDLE_STATES
> > + select CPU_IDLE_MULTIPLE_DRIVERS
> > + select DT_IDLE_GENPD if PM_GENERIC_DOMAINS_OF
> > + help
> > + Select this option to enable RISC-V SBI firmware based CPU idle
> > + driver for RISC-V systems. This drivers also supports hierarchical
> > + DT based layout of the idle state.
> > diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
> > index 11a26cef279f..a36922c18510 100644
> > --- a/drivers/cpuidle/Makefile
> > +++ b/drivers/cpuidle/Makefile
> > @@ -35,3 +35,7 @@ obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o
> > # POWERPC drivers
> > obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o
> > obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o
> > +
> > +###############################################################################
> > +# RISC-V drivers
> > +obj-$(CONFIG_RISCV_SBI_CPUIDLE) += cpuidle-sbi.o
> > diff --git a/drivers/cpuidle/cpuidle-sbi.c b/drivers/cpuidle/cpuidle-sbi.c
> > new file mode 100644
> > index 000000000000..286172b0368d
> > --- /dev/null
> > +++ b/drivers/cpuidle/cpuidle-sbi.c
> > @@ -0,0 +1,626 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * RISC-V SBI CPU idle driver.
> > + *
> > + * Copyright (c) 2021 Western Digital Corporation or its affiliates.
> > + */
> > +
> > +#define pr_fmt(fmt) "cpuidle-sbi: " fmt
> > +
> > +#include <linux/cpuidle.h>
> > +#include <linux/cpumask.h>
> > +#include <linux/cpu_pm.h>
> > +#include <linux/cpu_cooling.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/slab.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/pm_runtime.h>
> > +#include <asm/cpuidle.h>
> > +#include <asm/sbi.h>
> > +#include <asm/suspend.h>
> > +
> > +#include "dt_idle_states.h"
> > +#include "dt_idle_genpd.h"
> > +
> > +struct sbi_cpuidle_data {
> > + u32 *states;
> > + struct device *dev;
> > +};
> > +
> > +struct sbi_domain_state {
> > + bool available;
> > + u32 state;
> > +};
> > +
> > +static DEFINE_PER_CPU_READ_MOSTLY(struct sbi_cpuidle_data, sbi_cpuidle_data);
> > +static DEFINE_PER_CPU(struct sbi_domain_state, domain_state);
> > +static bool sbi_cpuidle_use_osi;
> > +static bool sbi_cpuidle_use_cpuhp;
> > +static bool sbi_cpuidle_pd_allow_domain_state;
> > +
> > +static inline void sbi_set_domain_state(u32 state)
> > +{
> > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> > +
> > + data->available = true;
> > + data->state = state;
> > +}
> > +
> > +static inline u32 sbi_get_domain_state(void)
> > +{
> > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> > +
> > + return data->state;
> > +}
> > +
> > +static inline void sbi_clear_domain_state(void)
> > +{
> > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> > +
> > + data->available = false;
> > +}
> > +
> > +static inline bool sbi_is_domain_state_available(void)
> > +{
> > + struct sbi_domain_state *data = this_cpu_ptr(&domain_state);
> > +
> > + return data->available;
> > +}
> > +
> > +static int sbi_suspend_finisher(unsigned long suspend_type,
> > + unsigned long resume_addr,
> > + unsigned long opaque)
> > +{
> > + struct sbiret ret;
> > +
> > + ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
> > + suspend_type, resume_addr, opaque, 0, 0, 0);
> > +
> > + return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
> > +}
> > +
> > +static int sbi_suspend(u32 state)
> > +{
> > + if (state & SBI_HSM_SUSP_NON_RET_BIT)
> > + return cpu_suspend(state, sbi_suspend_finisher);
> > + else
> > + return sbi_suspend_finisher(state, 0, 0);
> > +}
> > +
> > +static int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
> > + struct cpuidle_driver *drv, int idx)
> > +{
> > + u32 *states = __this_cpu_read(sbi_cpuidle_data.states);
> > +
> > + return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, states[idx]);
> > +}
> > +
> > +static int __sbi_enter_domain_idle_state(struct cpuidle_device *dev,
> > + struct cpuidle_driver *drv, int idx,
> > + bool s2idle)
> > +{
> > + struct sbi_cpuidle_data *data = this_cpu_ptr(&sbi_cpuidle_data);
> > + u32 *states = data->states;
> > + struct device *pd_dev = data->dev;
> > + u32 state;
> > + int ret;
> > +
> > + ret = cpu_pm_enter();
> > + if (ret)
> > + return -1;
> > +
> > + /* Do runtime PM to manage a hierarchical CPU toplogy. */
> > + rcu_irq_enter_irqson();
> > + if (s2idle)
> > + dev_pm_genpd_suspend(pd_dev);
> > + else
> > + pm_runtime_put_sync_suspend(pd_dev);
> > + rcu_irq_exit_irqson();
> > +
> > + if (sbi_is_domain_state_available())
> > + state = sbi_get_domain_state();
> > + else
> > + state = states[idx];
> > +
> > + ret = sbi_suspend(state) ? -1 : idx;
> > +
> > + rcu_irq_enter_irqson();
> > + if (s2idle)
> > + dev_pm_genpd_resume(pd_dev);
> > + else
> > + pm_runtime_get_sync(pd_dev);
> > + rcu_irq_exit_irqson();
> > +
> > + cpu_pm_exit();
> > +
> > + /* Clear the domain state to start fresh when back from idle. */
> > + sbi_clear_domain_state();
> > + return ret;
> > +}
> > +
> > +static int sbi_enter_domain_idle_state(struct cpuidle_device *dev,
> > + struct cpuidle_driver *drv, int idx)
> > +{
> > + return __sbi_enter_domain_idle_state(dev, drv, idx, false);
> > +}
> > +
> > +static int sbi_enter_s2idle_domain_idle_state(struct cpuidle_device *dev,
> > + struct cpuidle_driver *drv,
> > + int idx)
> > +{
> > + return __sbi_enter_domain_idle_state(dev, drv, idx, true);
> > +}
> > +
> > +static int sbi_cpuidle_cpuhp_up(unsigned int cpu)
> > +{
> > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev);
> > +
> > + if (pd_dev)
> > + pm_runtime_get_sync(pd_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static int sbi_cpuidle_cpuhp_down(unsigned int cpu)
> > +{
> > + struct device *pd_dev = __this_cpu_read(sbi_cpuidle_data.dev);
> > +
> > + if (pd_dev) {
> > + pm_runtime_put_sync(pd_dev);
> > + /* Clear domain state to start fresh at next online. */
> > + sbi_clear_domain_state();
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void sbi_idle_init_cpuhp(void)
> > +{
> > + int err;
> > +
> > + if (!sbi_cpuidle_use_cpuhp)
> > + return;
> > +
> > + err = cpuhp_setup_state_nocalls(CPUHP_AP_CPU_PM_STARTING,
> > + "cpuidle/sbi:online",
> > + sbi_cpuidle_cpuhp_up,
> > + sbi_cpuidle_cpuhp_down);
> > + if (err)
> > + pr_warn("Failed %d while setup cpuhp state\n", err);
> > +}
> > +
> > +static const struct of_device_id sbi_cpuidle_state_match[] = {
> > + { .compatible = "riscv,idle-state",
> > + .data = sbi_cpuidle_enter_state },
> > + { },
> > +};
> > +
> > +static bool sbi_suspend_state_is_valid(u32 state)
> > +{
> > + if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
> > + state < SBI_HSM_SUSPEND_RET_PLATFORM)
> > + return false;
> > + if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
> > + state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
> > + return false;
> > + return true;
> > +}
> > +
> > +static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
> > +{
> > + int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state);
> > +
> > + if (err) {
> > + pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np);
> > + return err;
> > + }
> > +
> > + if (!sbi_suspend_state_is_valid(*state)) {
> > + pr_warn("Invalid SBI suspend state %#x\n", *state);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int sbi_dt_cpu_init_topology(struct cpuidle_driver *drv,
> > + struct sbi_cpuidle_data *data,
> > + unsigned int state_count, int cpu)
> > +{
> > + /* Currently limit the hierarchical topology to be used in OSI mode. */
> > + if (!sbi_cpuidle_use_osi)
> > + return 0;
> > +
> > + data->dev = dt_idle_attach_cpu(cpu, "sbi");
> > + if (IS_ERR_OR_NULL(data->dev))
> > + return PTR_ERR_OR_ZERO(data->dev);
> > +
> > + /*
> > + * Using the deepest state for the CPU to trigger a potential selection
> > + * of a shared state for the domain, assumes the domain states are all
> > + * deeper states.
> > + */
> > + drv->states[state_count - 1].enter = sbi_enter_domain_idle_state;
> > + drv->states[state_count - 1].enter_s2idle =
> > + sbi_enter_s2idle_domain_idle_state;
> > + sbi_cpuidle_use_cpuhp = true;
> > +
> > + return 0;
> > +}
> > +
> > +static int sbi_cpuidle_dt_init_states(struct device *dev,
> > + struct cpuidle_driver *drv,
> > + unsigned int cpu,
> > + unsigned int state_count)
> > +{
> > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu);
> > + struct device_node *state_node;
> > + struct device_node *cpu_node;
> > + u32 *states;
> > + int i, ret;
> > +
> > + cpu_node = of_cpu_device_node_get(cpu);
> > + if (!cpu_node)
> > + return -ENODEV;
> > +
> > + states = devm_kcalloc(dev, state_count, sizeof(*states), GFP_KERNEL);
> > + if (!states) {
> > + ret = -ENOMEM;
> > + goto fail;
> > + }
> > +
> > + /* Parse SBI specific details from state DT nodes */
> > + for (i = 1; i < state_count; i++) {
> > + state_node = of_get_cpu_state_node(cpu_node, i - 1);
> > + if (!state_node)
> > + break;
> > +
> > + ret = sbi_dt_parse_state_node(state_node, &states[i]);
> > + of_node_put(state_node);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + pr_debug("sbi-state %#x index %d\n", states[i], i);
> > + }
> > + if (i != state_count) {
> > + ret = -ENODEV;
> > + goto fail;
> > + }
> > +
> > + /* Initialize optional data, used for the hierarchical topology. */
> > + ret = sbi_dt_cpu_init_topology(drv, data, state_count, cpu);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* Store states in the per-cpu struct. */
> > + data->states = states;
> > +
> > +fail:
> > + of_node_put(cpu_node);
> > +
> > + return ret;
> > +}
> > +
> > +static void sbi_cpuidle_deinit_cpu(int cpu)
> > +{
> > + struct sbi_cpuidle_data *data = per_cpu_ptr(&sbi_cpuidle_data, cpu);
> > +
> > + dt_idle_detach_cpu(data->dev);
> > + sbi_cpuidle_use_cpuhp = false;
> > +}
> > +
> > +static int sbi_cpuidle_init_cpu(struct device *dev, int cpu)
> > +{
> > + struct cpuidle_driver *drv;
> > + unsigned int state_count = 0;
> > + int ret = 0;
> > +
> > + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
> > + if (!drv)
> > + return -ENOMEM;
> > +
> > + drv->name = "sbi_cpuidle";
> > + drv->owner = THIS_MODULE;
> > + drv->cpumask = (struct cpumask *)cpumask_of(cpu);
> > +
> > + /* RISC-V architectural WFI to be represented as state index 0. */
> > + drv->states[0].enter = sbi_cpuidle_enter_state;
> > + drv->states[0].exit_latency = 1;
> > + drv->states[0].target_residency = 1;
> > + drv->states[0].power_usage = UINT_MAX;
> > + strcpy(drv->states[0].name, "WFI");
> > + strcpy(drv->states[0].desc, "RISC-V WFI");
> > +
> > + /*
> > + * If no DT idle states are detected (ret == 0) let the driver
> > + * initialization fail accordingly since there is no reason to
> > + * initialize the idle driver if only wfi is supported, the
> > + * default archictectural back-end already executes wfi
> > + * on idle entry.
> > + */
> > + ret = dt_init_idle_driver(drv, sbi_cpuidle_state_match, 1);
> > + if (ret <= 0) {
> > + pr_debug("HART%ld: failed to parse DT idle states\n",
> > + cpuid_to_hartid_map(cpu));
> > + return ret ? : -ENODEV;
> > + }
> > + state_count = ret + 1; /* Include WFI state as well */
> > +
> > + /* Initialize idle states from DT. */
> > + ret = sbi_cpuidle_dt_init_states(dev, drv, cpu, state_count);
> > + if (ret) {
> > + pr_err("HART%ld: failed to init idle states\n",
> > + cpuid_to_hartid_map(cpu));
> > + return ret;
> > + }
> > +
> > + ret = cpuidle_register(drv, NULL);
> > + if (ret)
> > + goto deinit;
> > +
> > + cpuidle_cooling_register(drv);
> > +
> > + return 0;
> > +deinit:
> > + sbi_cpuidle_deinit_cpu(cpu);
> > + return ret;
> > +}
> > +
> > +static void sbi_cpuidle_domain_sync_state(struct device *dev)
> > +{
> > + /*
> > + * All devices have now been attached/probed to the PM domain
> > + * topology, hence it's fine to allow domain states to be picked.
> > + */
> > + sbi_cpuidle_pd_allow_domain_state = true;
> > +}
> > +
> > +#ifdef CONFIG_DT_IDLE_GENPD
> > +
> > +static int sbi_cpuidle_pd_power_off(struct generic_pm_domain *pd)
> > +{
> > + struct genpd_power_state *state = &pd->states[pd->state_idx];
> > + u32 *pd_state;
> > +
> > + if (!state->data)
> > + return 0;
> > +
> > + if (!sbi_cpuidle_pd_allow_domain_state)
> > + return -EBUSY;
> > +
> > + /* OSI mode is enabled, set the corresponding domain state. */
> > + pd_state = state->data;
> > + sbi_set_domain_state(*pd_state);
> > +
> > + return 0;
> > +}
> > +
> > +struct sbi_pd_provider {
> > + struct list_head link;
> > + struct device_node *node;
> > +};
> > +
> > +static LIST_HEAD(sbi_pd_providers);
> > +
> > +static int sbi_pd_init(struct device_node *np)
> > +{
> > + struct generic_pm_domain *pd;
> > + struct sbi_pd_provider *pd_provider;
> > + struct dev_power_governor *pd_gov;
> > + int ret = -ENOMEM, state_count = 0;
> > +
> > + pd = dt_idle_pd_alloc(np, sbi_dt_parse_state_node);
> > + if (!pd)
> > + goto out;
> > +
> > + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL);
> > + if (!pd_provider)
> > + goto free_pd;
> > +
> > + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN;
> > +
> > + /* Allow power off when OSI is available. */
> > + if (sbi_cpuidle_use_osi)
> > + pd->power_off = sbi_cpuidle_pd_power_off;
> > + else
> > + pd->flags |= GENPD_FLAG_ALWAYS_ON;
> > +
> > + /* Use governor for CPU PM domains if it has some states to manage. */
> > + pd_gov = state_count > 0 ? &pm_domain_cpu_gov : NULL;
> > +
> > + ret = pm_genpd_init(pd, pd_gov, false);
> > + if (ret)
> > + goto free_pd_prov;
> > +
> > + ret = of_genpd_add_provider_simple(np, pd);
> > + if (ret)
> > + goto remove_pd;
> > +
> > + pd_provider->node = of_node_get(np);
> > + list_add(&pd_provider->link, &sbi_pd_providers);
> > +
> > + pr_debug("init PM domain %s\n", pd->name);
> > + return 0;
> > +
> > +remove_pd:
> > + pm_genpd_remove(pd);
> > +free_pd_prov:
> > + kfree(pd_provider);
> > +free_pd:
> > + dt_idle_pd_free(pd);
> > +out:
> > + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np);
> > + return ret;
> > +}
> > +
> > +static void sbi_pd_remove(void)
> > +{
> > + struct sbi_pd_provider *pd_provider, *it;
> > + struct generic_pm_domain *genpd;
> > +
> > + list_for_each_entry_safe(pd_provider, it, &sbi_pd_providers, link) {
> > + of_genpd_del_provider(pd_provider->node);
> > +
> > + genpd = of_genpd_remove_last(pd_provider->node);
> > + if (!IS_ERR(genpd))
> > + kfree(genpd);
> > +
> > + of_node_put(pd_provider->node);
> > + list_del(&pd_provider->link);
> > + kfree(pd_provider);
> > + }
> > +}
> > +
> > +static int sbi_genpd_probe(struct device_node *np)
> > +{
> > + struct device_node *node;
> > + int ret = 0, pd_count = 0;
> > +
> > + if (!np)
> > + return -ENODEV;
> > +
> > + /*
> > + * Parse child nodes for the "#power-domain-cells" property and
> > + * initialize a genpd/genpd-of-provider pair when it's found.
> > + */
> > + for_each_child_of_node(np, node) {
> > + if (!of_find_property(node, "#power-domain-cells", NULL))
> > + continue;
> > +
> > + ret = sbi_pd_init(node);
> > + if (ret)
> > + goto put_node;
> > +
> > + pd_count++;
> > + }
> > +
> > + /* Bail out if not using the hierarchical CPU topology. */
> > + if (!pd_count)
> > + goto no_pd;
> > +
> > + /* Link genpd masters/subdomains to model the CPU topology. */
> > + ret = dt_idle_pd_init_topology(np);
> > + if (ret)
> > + goto remove_pd;
> > +
> > + return 0;
> > +
> > +put_node:
> > + of_node_put(node);
> > +remove_pd:
> > + sbi_pd_remove();
> > + pr_err("failed to create CPU PM domains ret=%d\n", ret);
> > +no_pd:
> > + return ret;
> > +}
> > +
> > +#else
> > +
> > +static inline int sbi_genpd_probe(struct device_node *np)
> > +{
> > + return 0;
> > +}
> > +
> > +#endif
> > +
> > +static int sbi_cpuidle_probe(struct platform_device *pdev)
> > +{
> > + int cpu, ret;
> > + struct cpuidle_driver *drv;
> > + struct cpuidle_device *dev;
> > + struct device_node *np, *pds_node;
> > +
> > + /* Detect OSI support based on CPU DT nodes */
> > + sbi_cpuidle_use_osi = true;
> > + for_each_possible_cpu(cpu) {
> > + np = of_cpu_device_node_get(cpu);
> > + if (np &&
> > + of_find_property(np, "power-domains", NULL) &&
> > + of_find_property(np, "power-domain-names", NULL)) {
> > + continue;
> > + } else {
> > + sbi_cpuidle_use_osi = false;
> > + break;
> > + }
> > + }
> > +
> > + /* Populate generic power domains from DT nodes */
> > + pds_node = of_find_node_by_path("/cpus/power-domains");
> > + if (pds_node) {
> > + ret = sbi_genpd_probe(pds_node);
> > + of_node_put(pds_node);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + /* Initialize CPU idle driver for each CPU */
>
> Why do you need a separate cpuidle driver for every CPU?
>
> > + for_each_possible_cpu(cpu) {
> > + ret = sbi_cpuidle_init_cpu(&pdev->dev, cpu);
> > + if (ret) {
> > + pr_debug("HART%ld: idle driver init failed\n",
> > + cpuid_to_hartid_map(cpu));
> > + goto out_fail;
> > + }
> > + }
> > +
> > + /* Setup CPU hotplut notifiers */
> > + sbi_idle_init_cpuhp();
> > +
> > + pr_info("idle driver registered for all CPUs\n");
> > +
> > + return 0;
> > +
> > +out_fail:
> > + while (--cpu >= 0) {
> > + dev = per_cpu(cpuidle_devices, cpu);
> > + drv = cpuidle_get_cpu_driver(dev);
> > + cpuidle_unregister(drv);
> > + sbi_cpuidle_deinit_cpu(cpu);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static struct platform_driver sbi_cpuidle_driver = {
> > + .probe = sbi_cpuidle_probe,
> > + .driver = {
> > + .name = "sbi-cpuidle",
> > + .sync_state = sbi_cpuidle_domain_sync_state,
> > + },
> > +};
> > +
> > +static int __init sbi_cpuidle_init(void)
> > +{
> > + int ret;
> > + struct platform_device *pdev;
> > +
> > + /*
> > + * The SBI HSM suspend function is only available when:
> > + * 1) SBI version is 0.3 or higher
> > + * 2) SBI HSM extension is available
> > + */
> > + if ((sbi_spec_version < sbi_mk_version(0, 3)) ||
> > + sbi_probe_extension(SBI_EXT_HSM) <= 0) {
> > + pr_info("HSM suspend not available\n");
> > + return 0;
> > + }
> > +
> > + ret = platform_driver_register(&sbi_cpuidle_driver);
> > + if (ret)
> > + return ret;
> > +
> > + pdev = platform_device_register_simple("sbi-cpuidle",
> > + -1, NULL, 0);
> > + if (IS_ERR(pdev)) {
> > + platform_driver_unregister(&sbi_cpuidle_driver);
> > + return PTR_ERR(pdev);
> > + }
> > +
> > + return 0;
> > +}
> > +device_initcall(sbi_cpuidle_init);
> > --
> > 2.25.1
> >
More information about the linux-arm-kernel
mailing list