[PATCH v4 05/14] irqchip/irq-bcm7038-l1: Restrict affinity setting to MIPS

[Florian Fainelli]

Only MIPS based platforms using this interrupt controller as first level
interrupt controller can actually change the affinity of interrupts by
re-programming the affinity mask of the interrupt controller and use
another word group to have another CPU process the interrupt.

When this interrupt is used as a second level interrupt controller on
ARM/ARM64 there is no way to change the interrupt affinity. This fixes a
NULL pointer de-reference while trying to change the affinity since
there is only a single word group in that case, and we would have been
overruning the intc->cpus[] array.

Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/irqchip/irq-bcm7038-l1.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/irqchip/irq-bcm7038-l1.c b/drivers/irqchip/irq-bcm7038-l1.c
index 3c4e348c661e..357570dd8780 100644
--- a/drivers/irqchip/irq-bcm7038-l1.c
+++ b/drivers/irqchip/irq-bcm7038-l1.c
@@ -191,6 +191,7 @@ static void bcm7038_l1_mask(struct irq_data *d)
 	raw_spin_unlock_irqrestore(&intc->lock, flags);
 }
 
+#if defined(CONFIG_MIPS) && defined(CONFIG_SMP)
 static int bcm7038_l1_set_affinity(struct irq_data *d,
 				   const struct cpumask *dest,
 				   bool force)
@@ -217,6 +218,7 @@ static int bcm7038_l1_set_affinity(struct irq_data *d,
 
 	return 0;
 }
+#endif
 
 static int __init bcm7038_l1_init_one(struct device_node *dn,
 				      unsigned int idx,
@@ -365,7 +367,9 @@ static struct irq_chip bcm7038_l1_irq_chip = {
 	.name			= "bcm7038-l1",
 	.irq_mask		= bcm7038_l1_mask,
 	.irq_unmask		= bcm7038_l1_unmask,
+#if defined(CONFIG_SMP) && defined(CONFIG_MIPS)
 	.irq_set_affinity	= bcm7038_l1_set_affinity,
+#endif
 #ifdef CONFIG_PM_SLEEP
 	.irq_set_wake		= bcm7038_l1_set_wake,
 #endif
-- 
2.25.1