[PATCH V2 linux-pinctrl 1/2] Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"

Rob Herring robh at kernel.org
Fri Oct 8 13:49:06 PDT 2021


On Fri, Oct 08, 2021 at 10:08:46PM +0200, Rafał Miłecki wrote:
> On 08.10.2021 21:48, Rob Herring wrote:
> > On Fri, 08 Oct 2021 17:39:38 +0200, Rafał Miłecki wrote:
> > > From: Rafał Miłecki <rafal at milecki.pl>
> > > 
> > > This reverts commit 2ae80900f239484069569380e1fc4340fd6e0089.
> > > 
> > > My rework was unneeded & wrong. It replaced a clear & correct "reg"
> > > property usage with a custom "offset" one.
> > > 
> > > Back then I didn't understand how to properly handle CRU block binding.
> > > I heard / read about syscon and tried to use it in a totally invalid
> > > way. That change also missed Rob's review (obviously).
> > > 
> > > Northstar's pin controller is a simple consistent hardware block that
> > > can be cleanly mapped using a 0x24 long reg space.
> > > 
> > > Since the rework commit there wasn't any follow up modifying in-kernel
> > > DTS files to use the new binding. Broadcom also isn't known to use that
> > > bugged binding. There is close to zero chance this revert may actually
> > > cause problems / regressions.
> > > 
> > > This commit is a simple revert. Example binding may (should) be updated
> > > / cleaned up but that can be handled separately.
> > > 
> > > Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> > > ---
> > > V2: Update brcm,cru.yaml to avoid new yamllint warnings/errors
> > > ---
> > >   .../devicetree/bindings/mfd/brcm,cru.yaml     | 11 +++++----
> > >   .../bindings/pinctrl/brcm,ns-pinmux.yaml      | 23 +++++++++++--------
> > >   2 files changed, 19 insertions(+), 15 deletions(-)
> > > 
> > 
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > 
> > yamllint warnings/errors:
> > 
> > dtschema/dtc warnings/errors:
> > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.example.dt.yaml: cru at 1800c100: $nodename:0: 'cru at 1800c100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
> > 	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/simple-bus.yaml
> 
> It's warning we already have and not something introduced by this
> revert.

We don't allow warnings, so you're saying this one was warning before?

> As a revert this commit should introduce as little non-revert changes
> as possible. I'm planning to improve that example later in a separated
> commit.

You have to fix the warning as part of this series.

> 
> Can you take a look at this commit despite your bot warning, please?

If 'CRU' is a hardware block, then I don't think most of the revert is 
right to use 'simple-bus'. 

If you want to just replace 'offset' with 'reg', then I'd be happy to 
see that. I've been pushing child nodes of syscons in that direction.

Rob



More information about the linux-arm-kernel mailing list