[PATCH v2 2/2] arm64: dts: Add support for Unisoc's UMS512

Chunyan Zhang zhang.lyra at gmail.com
Thu Oct 7 20:45:33 PDT 2021


From: Chunyan Zhang <chunyan.zhang at unisoc.com>

Add basic DT to support Unisoc's UMS512, with this patch,
the board ums512-1h10 can run into console.

Signed-off-by: Chunyan Zhang <chunyan.zhang at unisoc.com>
---
 arch/arm64/boot/dts/sprd/Makefile        |   3 +-
 arch/arm64/boot/dts/sprd/sc2730.dtsi     | 263 +++++++
 arch/arm64/boot/dts/sprd/ums512-1h10.dts |  69 ++
 arch/arm64/boot/dts/sprd/ums512.dtsi     | 919 +++++++++++++++++++++++
 4 files changed, 1253 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/sprd/sc2730.dtsi
 create mode 100644 arch/arm64/boot/dts/sprd/ums512-1h10.dts
 create mode 100644 arch/arm64/boot/dts/sprd/ums512.dtsi

diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
index f4f1f5148cc2..97522fb0bf66 100644
--- a/arch/arm64/boot/dts/sprd/Makefile
+++ b/arch/arm64/boot/dts/sprd/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
 			sp9860g-1h10.dtb	\
-			sp9863a-1h10.dtb
+			sp9863a-1h10.dtb	\
+			ums512-1h10.dtb
diff --git a/arch/arm64/boot/dts/sprd/sc2730.dtsi b/arch/arm64/boot/dts/sprd/sc2730.dtsi
new file mode 100644
index 000000000000..88fa8eadd3fb
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/sc2730.dtsi
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc SC2730 PMIC dts file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+&adi_bus {
+	sc2730_pmic: pmic at 0 {
+		compatible = "sprd,sc2730";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulators at 1800 {
+			compatible = "sprd,sc2730-regulator";
+			reg = <0x1800>;
+
+			vddcpu: DCDC_CPU {
+				regulator-name = "vddcpu";
+				regulator-min-microvolt = <200000>;
+				regulator-max-microvolt = <1596875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddgpu: DCDC_GPU {
+				regulator-name = "vddgpu";
+				regulator-min-microvolt = <200000>;
+				regulator-max-microvolt = <1596875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddcore: DCDC_CORE {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <200000>;
+				regulator-max-microvolt = <1596875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddmodem: DCDC_MODEM {
+				regulator-name = "vddmodem";
+				regulator-min-microvolt = <200000>;
+				regulator-max-microvolt = <1596875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddmem: DCDC_MEM {
+				regulator-name = "vddmem";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1593750>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddmemq: DCDC_MEMQ {
+				regulator-name = "vddmemq";
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1596875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddgen0: DCDC_GEN0 {
+				regulator-name = "vddgen0";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <2410625>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddgen1: DCDC_GEN1 {
+				regulator-name = "vddgen1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1643750>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddsram: DCDC_SRAM {
+				regulator-name = "vddsram";
+				regulator-min-microvolt = <200000>;
+				regulator-max-microvolt = <1596875>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			avdd18: LDO_AVDD18 {
+				regulator-name = "avdd18";
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1805000>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddrf18: LDO_VDDRF18 {
+				regulator-name = "vddrf18";
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1805000>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddcamio: LDO_VDDCAMIO {
+				regulator-name = "vddcamio";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1830000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddwcn: LDO_VDDWCN {
+				regulator-name = "vddwcn";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1845000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd1: LDO_VDDCAMD1 {
+				regulator-name = "vddcamd1";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1365000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcamd0: LDO_VDDCAMD0 {
+				regulator-name = "vddcamd0";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1365000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddrf1v25: LDO_VDDRF1V25 {
+				regulator-name = "vddrf1v25";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1365000>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			avdd12: LDO_AVDD12 {
+				regulator-name = "avdd12";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1365000>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddcama0: LDO_VDDCAMA0 {
+				regulator-name = "vddcama0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcama1: LDO_VDDCAMA1 {
+				regulator-name = "vddcama1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddcammot: LDO_VDDCAMMOT {
+				regulator-name = "vddcammot";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsim2: LDO_VDDSIM2 {
+				regulator-name = "vddsim2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddemmccore: LDO_VDDEMMCCORE {
+				regulator-name = "vddemmccore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsdcore: LDO_VDDSDCORE {
+				regulator-name = "vddsdcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddsdio: LDO_VDDSDIO {
+				regulator-name = "vddsdio";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vdd28: LDO_VDD28 {
+				regulator-name = "vdd28";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddwifipa: LDO_VDDWIFIPA {
+				regulator-name = "vddwifipa";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vdd18_dcxo: LDO_VDD18_DCXO {
+				regulator-name = "vdd18_dcxo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+			};
+
+			vddusb33: LDO_VDDUSB33 {
+				regulator-name = "vddusb33";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddldo0: LDO_VDDLDO0 {
+				regulator-name = "vddldo0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddldo1: LDO_VDDLDO1 {
+				regulator-name = "vddldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddldo2: LDO_VDDLDO2 {
+				regulator-name = "vddldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+
+			vddkpled: LDO_VDDKPLED {
+				regulator-name = "vddkpled";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-ramp-delay = <25000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512-1h10.dts b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
new file mode 100644
index 000000000000..8722c3999ade
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512-1h10.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512-1h10 boards DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "ums512.dtsi"
+#include "sc2730.dtsi"
+
+/ {
+	model = "Unisoc UMS512-1H10 Board";
+
+	compatible = "sprd,ums512-1h10", "sprd,ums512";
+
+	sprd,sc-id = <512 1 0x20000>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+/* SD card */
+&sdio0 {
+	status = "okay";
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	sprd,phy-delay-sd-uhs-sdr104 = <0x7f 0x73 0x72 0x72>;
+	sprd,phy-delay-sd-uhs-sdr50 = <0x6e 0x7f 0x01 0x01>;
+	sprd,phy-delay-sd-highspeed = <0x7f 0x1a 0x9a 0x9a>;
+	sprd,phy-delay-legacy = <0x7f 0x1a 0x9a 0x9a>;
+	vmmc-supply = <&vddsdcore>;
+	vqmmc-supply = <&vddsdio>;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+};
+
+/* EMMC storage */
+&sdio3 {
+	status = "okay";
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	cap-mmc-hw-reset;
+};
diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi
new file mode 100644
index 000000000000..028e17f8198e
--- /dev/null
+++ b/arch/arm64/boot/dts/sprd/ums512.dtsi
@@ -0,0 +1,919 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Unisoc UMS512 SoC DTS file
+ *
+ * Copyright (C) 2021, Unisoc Inc.
+ */
+
+#include <dt-bindings/clock/sprd,ums512-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+				core4 {
+					cpu = <&CPU4>;
+				};
+				core5 {
+					cpu = <&CPU5>;
+				};
+				core6 {
+					cpu = <&CPU6>;
+				};
+				core7 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		CPU0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU1: cpu at 100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU2: cpu at 200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU3: cpu at 300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x300>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU4: cpu at 400 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x400>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU5: cpu at 500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x500>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU6: cpu at 600 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x600>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+
+		CPU7: cpu at 700 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x700>;
+			enable-method = "psci";
+			cpu-idle-states = <&CORE_PD>;
+		};
+	};
+
+	idle-states {
+		entry-method = "psci";
+		CORE_PD: core-pd {
+			compatible = "arm,idle-state";
+			entry-latency-us = <4000>;
+			exit-latency-us = <4000>;
+			min-residency-us = <10000>;
+			local-timer-stop;
+			arm,psci-suspend-param = <0x00010000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller at 12000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			redistributor-stride = <0x0 0x20000>;	/* 128KB stride */
+			#redistributor-regions = <1>;
+			interrupt-controller;
+			reg = <0x0 0x12000000 0 0x20000>,	/* GICD */
+			      <0x0 0x12040000 0 0x100000>;	/* GICR */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ap_ahb_regs: syscon at 20100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20100000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20100000 0x4000>;
+
+			apahb_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-apahb-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pub_apb_regs: syscon at 31050000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x31050000 0 0x9000>;
+		};
+
+		top_dvfs_apb_regs: syscon at 322a0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x322a0000 0 0x8000>;
+		};
+
+		ap_intc0_regs: syscon at 32310000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32310000 0 0x1000>;
+		};
+
+		ap_intc1_regs: syscon at 32320000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32320000 0 0x1000>;
+		};
+
+		ap_intc2_regs: syscon at 32330000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32330000 0 0x1000>;
+		};
+
+		ap_intc3_regs: syscon at 32340000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32340000 0 0x1000>;
+		};
+
+		ap_intc4_regs: syscon at 32350000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32350000 0 0x1000>;
+		};
+
+		ap_intc5_regs: syscon at 32360000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32360000 0 0x1000>;
+		};
+
+		anlg_phy_g0_regs: syscon at 32390000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x32390000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x32390000 0x3000>;
+
+			dpll0: clock-controller at 0 {
+				compatible = "sprd,ums512-g0-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon at 323b0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323b0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323b0000 0x3000>;
+
+			mpll1: clock-controller at 0 {
+				compatible = "sprd,ums512-g2-pll";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g3_regs: syscon at 323c0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323c0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323c0000 0x3000>;
+
+			pll1: clock-controller at 0 {
+				compatible = "sprd,ums512-g3-pll";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_gc_regs: syscon at 323e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x323e0000 0x3000>;
+
+			pll2: clock-controller at 0 {
+				compatible = "sprd,ums512-gc-pll";
+				reg = <0x0 0x100>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g10_regs: syscon at 323f0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x323f0000 0 0x3000>;
+		};
+
+		aon_apb_regs: syscon at 327d0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327d0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327d0000 0x3000>;
+
+			aonapb_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-aon-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_apb_regs: syscon at 327e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x327e0000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x327e0000 0x3000>;
+
+			pmu_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-pmu-gate";
+				reg = <0x0 0x3000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_apb_regs: syscon at 3350d000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x3350d000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x3350d000 0x1000>;
+
+			audcpapb_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-audcpapb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		audcp_ahb_regs: syscon at 335e0000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x335e0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x335e0000 0x1000>;
+
+			audcpahb_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-audcpahb-gate";
+				reg = <0x0 0x300>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_apb_regs: syscon at 60100000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60100000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60100000 0x3000>;
+
+			gpu_clk: clock-controller at 0 {
+				compatible = "sprd,ums512-gpu-clk";
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				reg = <0x0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		gpu_dvfs_apb_regs: syscon at 60110000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60110000 0 0x3000>;
+		};
+
+		mm_ahb_regs: syscon at 62200000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x62200000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x62200000 0x3000>;
+
+			mm_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-mm-gate-clk";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon at 71000000 {
+			compatible = "sprd,ums512-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71000000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71000000 0x3000>;
+
+			apapb_gate: clock-controller at 0 {
+				compatible = "sprd,ums512-apapb-gate";
+				reg = <0x0 0x3000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_clk: clock-controller at 20200000 {
+			compatible = "sprd,ums512-ap-clk";
+			reg = <0 0x20200000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller at 32080000 {
+			compatible = "sprd,ums512-aonapb-clk";
+			reg = <0 0x32080000 0 0x1000>;
+			clocks = <&ext_26m>, <&ext_32k>,
+				 <&ext_4m>, <&rco_100m>;
+			clock-names = "ext-26m", "ext-32k",
+				      "ext-4m", "rco-100m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller at 62100000 {
+			compatible = "sprd,ums512-mm-clk";
+			reg = <0 0x62100000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		/* SoC Funnel */
+		funnel at 3c002000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3c002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_soc_out_port: endpoint {
+						remote-endpoint = <&etb_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 1 {
+					reg = <1>;
+					funnel_soc_in_port: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_out_port>;
+					};
+				};
+			};
+		};
+
+		/* SoC ETF */
+		soc_etb: etb at 3c003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3c003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			in-ports {
+				port {
+					etb_in: endpoint {
+						remote-endpoint =
+						<&funnel_soc_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core3/4/5/7 */
+		funnel at 3e001000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e001000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_lit_out_port: endpoint {
+						remote-endpoint =
+						<&corinth_etf_lit_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					funnel_core_in_port3: endpoint {
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					funnel_core_in_port4: endpoint {
+						remote-endpoint = <&etm4_out>;
+					};
+				};
+
+				port at 2 {
+					reg = <2>;
+					funnel_core_in_port5: endpoint {
+						remote-endpoint = <&etm5_out>;
+					};
+				};
+
+				port at 3 {
+					reg = <3>;
+					funnel_core_in_port7: endpoint {
+						remote-endpoint = <&etm7_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for little cores */
+		etf at 3e002000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e002000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_lit_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_lit_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_lit_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_lit_out_port>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU ETF for big cores */
+		etf at 3e003000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0x3e003000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					corinth_etf_big_out: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_from_big_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				port {
+					corinth_etf_big_in: endpoint {
+						remote-endpoint =
+						<&funnel_corinth_big_out_port>;
+					};
+				};
+			};
+		};
+
+		/* Funnel to SoC */
+		funnel at 3e004000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e004000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_out_port: endpoint {
+						remote-endpoint =
+						<&funnel_soc_in_port>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					funnel_corinth_from_lit_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_lit_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					funnel_corinth_from_big_in_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_out>;
+					};
+				};
+			};
+		};
+
+		/* AP-CPU Funnel for core0/1/2/6 */
+		funnel at 3e005000 {
+			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+			reg = <0 0x3e005000 0 0x1000>;
+			clocks = <&ext_26m>;
+			clock-names = "apb_pclk";
+
+			out-ports {
+				port {
+					funnel_corinth_big_out_port: endpoint {
+						remote-endpoint = <&corinth_etf_big_in>;
+					};
+				};
+			};
+
+			in-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					funnel_core_in_port0: endpoint {
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					funnel_core_in_port1: endpoint {
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+
+				port at 2 {
+					reg = <2>;
+					funnel_core_in_port2: endpoint {
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+
+				port at 3 {
+					reg = <3>;
+					funnel_core_in_port6: endpoint {
+						remote-endpoint = <&etm6_out>;
+					};
+				};
+			};
+		};
+
+		etm0: etm at 3f040000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f040000 0 0x1000>;
+			cpu = <&CPU0>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm0_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port0>;
+					};
+				};
+			};
+		};
+
+		etm1: etm at 3f140000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f140000 0 0x1000>;
+			cpu = <&CPU1>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm1_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port1>;
+					};
+				};
+			};
+		};
+
+		etm2: etm at 3f240000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f240000 0 0x1000>;
+			cpu = <&CPU2>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm2_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port2>;
+					};
+				};
+			};
+		};
+
+		etm3: etm at 3f340000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f340000 0 0x1000>;
+			cpu = <&CPU3>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm3_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port3>;
+					};
+				};
+			};
+		};
+
+		etm4: etm at 3f440000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f440000 0 0x1000>;
+			cpu = <&CPU4>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm4_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port4>;
+					};
+				};
+			};
+		};
+
+		etm5: etm at 3f540000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f540000 0 0x1000>;
+			cpu = <&CPU5>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm5_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port5>;
+					};
+				};
+			};
+		};
+
+		etm6: etm at 3f640000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f640000 0 0x1000>;
+			cpu = <&CPU6>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm6_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port6>;
+					};
+				};
+			};
+		};
+
+		etm7: etm at 3f740000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0x3f740000 0 0x1000>;
+			cpu = <&CPU7>;
+			clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>;
+			clock-names = "apb_pclk", "clk_cs", "cs_src";
+
+			out-ports {
+				port {
+					etm7_out: endpoint {
+						remote-endpoint =
+						<&funnel_core_in_port7>;
+					};
+				};
+			};
+		};
+
+
+		apb at 70000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0x70000000 0x10000000>;
+
+			uart0: serial at 0 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+
+			uart1: serial at 100000 {
+				compatible = "sprd,ums512-uart",
+					     "sprd,sc9836-uart";
+				reg = <0x100000 0x100>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ext_26m>;
+				status = "disabled";
+			};
+		};
+
+		ap-apb {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			sdio0: sdio at 71100000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x71100000 0 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_SDIO0_2X>,
+					 <&apapb_gate CLK_SDIO0_EB>;
+				assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+
+			sdio3: sdio at 71400000 {
+				compatible = "sprd,sdhci-r11";
+				reg = <0 0x71400000 0 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "sdio", "enable";
+				clocks = <&ap_clk CLK_EMMC_2X>,
+					 <&apapb_gate CLK_EMMC_EB>;
+				assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+				assigned-clock-parents = <&pll1 CLK_RPLL>;
+				status = "disabled";
+			};
+		};
+
+		aon {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			adi_bus: spi at 32100000 {
+				compatible = "sprd,ums512-adi";
+				reg = <0 0x32100000 0 0x100000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>,
+					<17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>,
+					<35 0x19b8>, <39 0x19ac>;
+			};
+		};
+	};
+
+	ext_26m: ext-26m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "ext-26m";
+	};
+
+	ext_32k: ext-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: ext-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: rco-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
+};
-- 
2.25.1




More information about the linux-arm-kernel mailing list