[PATCH] arm64: dts: imx8mm-venice-gw7901.dts: disable pgc_gpumix

[Lucas Stach]

Am Dienstag, dem 05.10.2021 um 08:23 -0700 schrieb Tim Harvey:
> Since commit d39d4bb15310 ("arm64: dts: imx8mm: add GPC node") the
> GW7901 will hang during kernel init because it does not power the unused GPU
> voltage rails on the IMX8MM. Disable pgc_gpumix to work around this.
> 
> We also disable the GPU devices that depend on the gpumix power domain
> to avoid them staying in a probe deferred state forever.
> 
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>  .../boot/dts/freescale/imx8mm-venice-gw7901.dts      | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> index bafd5c8ea4e2..e0153ce35722 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> @@ -282,6 +282,14 @@
>  	};
>  };
>  
> +&gpu_2d {
> +	status = "disabled";
> +};
> +
> +&gpu_3d {
> +	status = "disabled";
> +};
> +
>  &i2c1 {
>  	clock-frequency = <100000>;
>  	pinctrl-names = "default";
> @@ -632,6 +640,10 @@
>  	status = "okay";
>  };
>  
> +&pgc_gpumix {
> +	status = "disabled";
> +};

I suggest to also disable the pgc_gpu, as that one is in the same
situation as the GPU devices and will stay in probe deferred state
forever, as the gpumix domain is not available.

Regards,
Lucas

> +
>  &uart1 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;