[PATCH] arm64: dts: allwinner: NanoPi R1S H5: use the correct compatible for the eeprom

[Chen-Yu Tsai]

Hi,

On Fri, Oct 1, 2021 at 10:51 PM Chukun Pan <amadeus at jmu.edu.cn> wrote:
>
> The 'microchip,24c02' compatible does not match the at24 driver, so
> replace it with 'atmel,24c02'. In addition, because the mac address
> is stored on this eeprom, set it to read-only mode.
>
> Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> index 55bcdf8d1a07..4f01c17c49e0 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> @@ -142,9 +142,10 @@
>         status = "okay";
>
>         eeprom at 51 {
> -               compatible = "microchip,24c02";
> -               reg = <0x51>;
> +               compatible = "atmel,24c02";

You should add the atmel compatible as a fallback one, not replace the
microchip one.

Also FTR 24c02 is not the correct part number. It is 24aa025e48.


>                 pagesize = <16>;
> +               reg = <0x51>;

Please don't move the reg property. It should follow the compatible.

> +               read-only; /* This holds our MAC */

Please also add a cell representing the MAC address, and hook it up
to the GMAC. You can find an example here [1].

Regards
ChenYu

[1] https://lore.kernel.org/linux-rockchip/20210622034505.18824-1-cnsztl@gmail.com/

>         };
>  };
>
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel