[PATCH v2 15/15] ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64

[Stephan Gerhold]

After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64
tree together with the ARM32 include to allow booting this device on ARM32.

The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.

Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
---
Changes in v2: None.

I'm not sure what's the best way to apply this patch...
It might be easiest to apply the two ARM32 dts patches to the arm64 branch.
(It does not seem to cause any conflicts at the moment...)
---
 arch/arm/boot/dts/Makefile                           | 1 +
 arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts | 3 +++
 2 files changed, 4 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8cb859728bd9..0a53bbd9d7b1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -960,6 +960,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq8064-rb3011.dtb \
 	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
+	qcom-msm8916-samsung-serranove.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-fairphone-fp2.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
new file mode 100644
index 000000000000..dee2c20af355
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "arm64/qcom/msm8916-samsung-serranove.dts"
+#include "qcom-msm8916-smp.dtsi"
-- 
2.33.0