[PATCH v7 3/7] i2c: mediatek: Dump i2c/dma register when a timeout occurs

[Wolfram Sang]

> @@ -837,6 +839,57 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
>  	return 0;
>  }

> +static void i2c_dump_register(struct mtk_i2c *i2c)
> +{
> +	dev_err(i2c->dev, "SLAVE_ADDR: 0x%x, INTR_MASK: 0x%x\n",
> +		mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR),
> +		mtk_i2c_readw(i2c, OFFSET_INTR_MASK));

I think this is too verbose and should be a debugging only patch not
really suited for upstream. But if you like it this way, then keep
the verbosity. However, dev_err is too strong, this really needs to be
dev_dbg. Timeouts can happen on an I2C bus, think about an EEPROM in a
long erase cycle while you want to read it. Perfectly normal.


>  	if (ret == 0) {
> -		dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
> +		dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
> +		i2c_dump_register(i2c);

Needs to stay dev_dbg as well.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20211002/666a890c/attachment.sig>