[PATCH v5 03/18] soc: imx: gpcv2: Set both GPC_PGC_nCTRL(GPU_2D|GPU_3D) for MX8MM GPU domain

[Lucas Stach]

From: Marek Vasut <marex at denx.de>

To bring up the MX8MM GPU domain, it is necessary to configure both
GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers. Without
this configuration, the system might hang on boot when bringing up
the GPU power domain. This is sporadically observed on multiple
disparate systems.

Add the GPU3D bit into MX8MM GPU domain pgc bitfield, so that both
GPC_PGC_nCTRL(GPU_2D) and GPC_PGC_nCTRL(GPU_3D) registers are
configured when bringing up the GPU domain. This fixes the sporadic
hang.

Signed-off-by: Marek Vasut <marex at denx.de>
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/soc/imx/gpcv2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index c7826ce92f0d..2c43e74db0be 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -679,7 +679,7 @@ static const struct imx_pgc_domain imx8mm_pgc_domains[] = {
 			.hskreq = IMX8MM_GPU_HSK_PWRDNREQN,
 			.hskack = IMX8MM_GPU_HSK_PWRDNACKN,
 		},
-		.pgc   = BIT(IMX8MM_PGC_GPU2D),
+		.pgc   = BIT(IMX8MM_PGC_GPU2D) | BIT(IMX8MM_PGC_GPU3D),
 	},
 
 	[IMX8MM_POWER_DOMAIN_VPUMIX] = {
-- 
2.30.2