[PATCH v5 4/4] dt-bindings: dsp: fsl: update binding document for remote proc driver

[Rob Herring]

On Wed, Sep 29, 2021 at 9:34 PM Shengjiu Wang <shengjiu.wang at gmail.com> wrote:
>
> Hi Rob
>
> On Thu, Sep 30, 2021 at 6:40 AM Rob Herring <robh at kernel.org> wrote:
> >
> > On Sun, Sep 26, 2021 at 11:07:10AM +0800, Shengjiu Wang wrote:
> > > As there are two drivers for DSP on i.MX, one is for sound open
> > > firmware, another is for remote processor framework. In order to
> > > distinguish two kinds of driver, defining different compatible strings.
> > >
> > > For remote proc driver, the properties firmware-name and fsl,dsp-ctrl
> > > are needed and the mailbox channel is different with SOF.
> > >
> > > Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > > Acked-by: Daniel Baluta <daniel.baluta at nxp.com>
> > > ---
> > >  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 81 +++++++++++++++++--
> > >  1 file changed, 75 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > > index 7afc9f2be13a..51ea657f6d42 100644
> > > --- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > > +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > > @@ -8,6 +8,7 @@ title: NXP i.MX8 DSP core
> > >
> > >  maintainers:
> > >    - Daniel Baluta <daniel.baluta at nxp.com>
> > > +  - Shengjiu Wang <shengjiu.wang at nxp.com>
> > >
> > >  description: |
> > >    Some boards from i.MX8 family contain a DSP core used for
> > > @@ -19,6 +20,10 @@ properties:
> > >        - fsl,imx8qxp-dsp
> > >        - fsl,imx8qm-dsp
> > >        - fsl,imx8mp-dsp
> > > +      - fsl,imx8qxp-hifi4
> > > +      - fsl,imx8qm-hifi4
> > > +      - fsl,imx8mp-hifi4
> > > +      - fsl,imx8ulp-hifi4
> > >
> > >    reg:
> > >      maxItems: 1
> > > @@ -28,37 +33,63 @@ properties:
> > >        - description: ipg clock
> > >        - description: ocram clock
> > >        - description: core clock
> > > +      - description: debug interface clock
> > > +      - description: message unit clock
> > > +    minItems: 3
> > > +    maxItems: 5
> >
> > Don't need maxItems.
>
> Ok, I will update it.
>
> >
> > >
> > >    clock-names:
> > >      items:
> > >        - const: ipg
> > >        - const: ocram
> > >        - const: core
> > > +      - const: debug
> > > +      - const: mu
> > > +    minItems: 3
> > > +    maxItems: 5
> >
> > ditto
>
> Ok, I will update it.
>
> >
> > >
> > >    power-domains:
> > >      description:
> > >        List of phandle and PM domain specifier as documented in
> > >        Documentation/devicetree/bindings/power/power_domain.txt
> > > +    minItems: 1
> >
> > This is curious. The h/w sometimes has fewer power domains?
>
> On i.MX8QM/8QXP,  there are independent power domains for DSP core,
> DSP's RAM and DSP's MU.
> But on i.MX8MP, all these DSP components are in same audio subsystem
> There is only one power domain for whole audio subsystem,  when
> power on audio subsystem, the DSP's components are powered on also.
>
> So the number of power domain depends on how the DSP component
> integrated in SoC.

Sounds like you can write an if/then schema for this difference.

Rob