[RESEND v2 00/10] arm64: dts: Add i.MX8DXL initial support

[Abel Vesa]

This allows i.MX8DXL EVK board to boot to prompt.

CC'ed devicetree at vger.kernel.org this time and fixed
the numbering of cover letter, there are only 10 patches in
this patchset.

Abel Vesa (5):
  arm64: dts: imx8-ss-lsio: Add mu5a mailbox
  arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
  dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding
  dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
  dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible

Jacky Bai (5):
  arm64: dts: freescale: Add the top level dtsi support for imx8dxl
  arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
  arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
  arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
  arm64: dts: imx8dxl: Add i.MX8DXL evk board support

 .../bindings/arm/freescale/fsl,scu.txt        |   3 +-
 .../bindings/i2c/i2c-imx-lpi2c.yaml           |   2 +
 .../bindings/serial/fsl-lpuart.yaml           |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      |   7 +
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   |  53 ++++
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 137 +++++++++
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    |  36 +++
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  78 +++++
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi    | 245 ++++++++++++++++
 11 files changed, 828 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

-- 
2.31.1