[PATCH v2 4/4] usb: aspeed-vhub: support test mode feature

Neal Liu neal_liu at aspeedtech.com
Tue Nov 30 19:36:58 PST 2021


> -----Original Message-----
> From: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Sent: Tuesday, November 30, 2021 7:47 PM
> To: Neal Liu <neal_liu at aspeedtech.com>
> Cc: Felipe Balbi <balbi at kernel.org>; Joel Stanley <joel at jms.id.au>; Andrew
> Jeffery <andrew at aj.id.au>; Cai Huoqing <caihuoqing at baidu.com>; Tao Ren
> <rentao.bupt at gmail.com>; Julia Lawall <julia.lawall at inria.fr>; kernel test
> robot <lkp at intel.com>; Sasha Levin <sashal at kernel.org>;
> linux-usb at vger.kernel.org; linux-kernel at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-aspeed at lists.ozlabs.org; BMC-SW
> <BMC-SW at aspeedtech.com>
> Subject: Re: [PATCH v2 4/4] usb: aspeed-vhub: support test mode feature
> 
> On Tue, Nov 30, 2021 at 06:42:56PM +0800, Neal Liu wrote:
> > Support aspeed usb vhub set feature to test mode.
> >
> > Signed-off-by: Neal Liu <neal_liu at aspeedtech.com>
> > ---
> >  drivers/usb/gadget/udc/aspeed-vhub/dev.c | 18 ++++++++++++++----
> > drivers/usb/gadget/udc/aspeed-vhub/hub.c | 22 ++++++++++++++++------
> >  2 files changed, 30 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> > b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> > index d918e8b2af3c..4462f4b73b04 100644
> > --- a/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> > +++ b/drivers/usb/gadget/udc/aspeed-vhub/dev.c
> > @@ -110,15 +110,25 @@ static int ast_vhub_dev_feature(struct
> ast_vhub_dev *d,
> >  				u16 wIndex, u16 wValue,
> >  				bool is_set)
> >  {
> > +	u32 val;
> > +
> >  	DDBG(d, "%s_FEATURE(dev val=%02x)\n",
> >  	     is_set ? "SET" : "CLEAR", wValue);
> >
> > -	if (wValue != USB_DEVICE_REMOTE_WAKEUP)
> > -		return std_req_driver;
> > +	if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
> > +		d->wakeup_en = is_set;
> > +		return std_req_complete;
> >
> > -	d->wakeup_en = is_set;
> > +	} else if (wValue == USB_DEVICE_TEST_MODE) {
> 
> If you return, no need for an else statement, right?
> 
> 
> > +		val = readl(d->vhub->regs + AST_VHUB_CTRL);
> > +		val &= ~GENMASK(10, 8);
> > +		val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7);
> > +		writel(val, d->vhub->regs + AST_VHUB_CTRL);
> >
> > -	return std_req_complete;
> > +		return std_req_complete;
> > +	}
> > +
> > +	return std_req_driver;
> >  }
> >
> >  static int ast_vhub_ep_feature(struct ast_vhub_dev *d, diff --git
> > a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> > b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> > index 93f27a745760..e52805fbdebd 100644
> > --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> > +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
> > @@ -212,17 +212,27 @@ static int ast_vhub_hub_dev_feature(struct
> ast_vhub_ep *ep,
> >  				    u16 wIndex, u16 wValue,
> >  				    bool is_set)
> >  {
> > +	u32 val;
> > +
> >  	EPDBG(ep, "%s_FEATURE(dev val=%02x)\n",
> >  	      is_set ? "SET" : "CLEAR", wValue);
> >
> > -	if (wValue != USB_DEVICE_REMOTE_WAKEUP)
> > -		return std_req_stall;
> > +	if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
> > +		ep->vhub->wakeup_en = is_set;
> > +		EPDBG(ep, "Hub remote wakeup %s\n",
> > +		      is_set ? "enabled" : "disabled");
> > +		return std_req_complete;
> >
> > -	ep->vhub->wakeup_en = is_set;
> > -	EPDBG(ep, "Hub remote wakeup %s\n",
> > -	      is_set ? "enabled" : "disabled");
> > +	} else if (wValue == USB_DEVICE_TEST_MODE) {
> 
> Same here, no need for else.
> 
> thanks,
> 
> greg k-h

Okay, I'll fix it in next patch. Thanks

-Neal



More information about the linux-arm-kernel mailing list